{"title":"Unitronic","description":"","products":[{"product_id":"unitronic-3-inch-intake-system-for-2-5-tfsi-evo-8v-8y-rs3-ttrs","title":"Unitronic 3 Inch Intake System for 2.5 TFSI EVO - 8V 8Y RS3 \/ TTRS","description":"\u003ch3\u003ePRODUCT DESCRIPTION:\u003c\/h3\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eUnitronic's all-new 3'' Carbon Fiber Intake System for the 2.5TFSI EA855 EVO (DAZA) engines, found in the 8V.2 Audi RS 3 and 8S Audi TT RS delivers up to 41% more airflow over stock and is engineered for seamless integration with our high flowing 3 Inch Turbo Inlet Elbow to maximize performance on the 2.5TFSI EA855 EVO engines.\u003cbr\u003e\u003cbr\u003eBuilt with reinforced materials, high quality EPDM couplers and stainless steel hardware, this Intake System is more than capable of standing up to the rigors of track use or daily driving.\u003cbr\u003e\u003cbr\u003eThis new Intake System is also available with a\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.getunitronic.com\/parts\/intakes\/25tfsievo-4in-intake\" target=\"_tab\"\u003e4'' to 4'' intake tube.\u003c\/a\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch4 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h4\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003e41%% increase in flow over stock\u003c\/li\u003e\n\u003cli\u003e2\/2 Twill prepreg carbon fiber weave\u003c\/li\u003e\n\u003cli\u003eAutoclave construction\u003c\/li\u003e\n\u003cli\u003eEPDM couplers\u003c\/li\u003e\n\u003cli\u003eHigh-quality stainless steel hose clamps\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment with OEM Mounting Locations \u0026amp; EPDM mounting grommets\u003c\/li\u003e\n\u003cli\u003eSmooth airflow transitions\u003c\/li\u003e\n\u003cli\u003eProven power, torque, and airflow gains\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch4 class=\"textTitle\"\u003eHardware Included\u003c\/h4\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnitronic Carbon Fiber Airbox\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Air Duct\u003c\/li\u003e\n\u003cli\u003e4\" to 3\" Carbon Fiber Intake Tube\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Transition Tube\u003c\/li\u003e\n\u003cli\u003e4\" EPDM Inlet Coupler\u003c\/li\u003e\n\u003cli\u003e4\" EPDM Flex Coupler\u003c\/li\u003e\n\u003cli\u003e6\" Tapered Cone Air Filter\u003c\/li\u003e\n\u003cli\u003eEPDM Mounting Grommets\u003c\/li\u003e\n\u003cli\u003eAll Necessary Hardware Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":48982817636654,"sku":"UH022-INA","price":1754.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/img_3308425tfsievo3inchintake2021web.jpg?v=1718145743"},{"product_id":"unitronic-4-inch-intake-system-for-2-5-tfsi-evo-8v-8y-rs3-ttrs","title":"Unitronic 4 Inch Intake System for 2.5 TFSI EVO - 8V 8Y RS3 \/ TTRS","description":"\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch3 class=\"textTitle\"\u003ePRODUCT DESCRIPTION:\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eUnitronic's all-new 4'' Carbon Fiber Intake System for the 2.5TFSI EA855 EVO (DAZA) engines, found in the 8V.2 Audi RS 3 and 8S Audi TT RS delivers up to 88% more airflow over stock and is engineered for seamless integration with our high flowing 4 Inch Turbo Inlet Elbow to maximize performance on the 2.5TFSI EA855 EVO engines.\u003cbr\u003e\u003cbr\u003eBuilt with reinforced materials, high quality EPDM couplers and stainless steel hardware, this Intake System is more than capable of standing up to the rigors of track use or daily driving.\u003cbr\u003e\u003cbr\u003eThis new Intake System is also available with a\u003cspan\u003e \u003c\/span\u003e4'' to 3'' intake tube.\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cbr\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch4 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h4\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003e88% increase in flow over stock\u003c\/li\u003e\n\u003cli\u003e2\/2 Twill prepreg carbon fiber weave\u003c\/li\u003e\n\u003cli\u003eAutoclave construction\u003c\/li\u003e\n\u003cli\u003eEPDM couplers\u003c\/li\u003e\n\u003cli\u003eHigh-quality stainless steel hose clamps\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment with OEM Mounting Locations \u0026amp; EPDM mounting grommets\u003c\/li\u003e\n\u003cli\u003eSmooth airflow transitions\u003c\/li\u003e\n\u003cli\u003eProven power, torque, and airflow gains\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cbr\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch4 class=\"textTitle\"\u003eHardware Included\u003c\/h4\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnitronic Carbon Fiber Airbox\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Air Duct\u003c\/li\u003e\n\u003cli\u003e4\" Carbon Fiber Intake Tube\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Transition Tube\u003c\/li\u003e\n\u003cli\u003e4\" EPDM Inlet Coupler\u003c\/li\u003e\n\u003cli\u003e4\" EPDM Flex Coupler\u003c\/li\u003e\n\u003cli\u003e6\" Tapered Cone Air Filter\u003c\/li\u003e\n\u003cli\u003eEPDM Mounting Grommets\u003c\/li\u003e\n\u003cli\u003eAll Necessary Hardware Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Unitronic","offers":[{"title":"8V (2017-2018)","offer_id":51702531391790,"sku":"UH020-INA-1","price":1754.99,"currency_code":"USD","in_stock":true},{"title":"8V.5 (2019-2020)","offer_id":51702531424558,"sku":"UH020-INA-2","price":1754.99,"currency_code":"USD","in_stock":true},{"title":"8Y (2021-2024)","offer_id":51702531457326,"sku":"UH020-INA-3","price":1859.98,"currency_code":"USD","in_stock":true},{"title":"8Y.5 (2025+)","offer_id":51702531490094,"sku":"UH020-INA-4","price":1859.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/img_3403325evocarboncaiv2021web.jpg?v=1770086975"},{"product_id":"avis-option-1718146053292-252840","title":"Unitronic 6 inch Tapered Cone Race Air Filter","description":null,"brand":"Unitronic","offers":[{"title":"Default Title","offer_id":48982840246574,"sku":"","price":43.99,"currency_code":"USD","in_stock":true}]},{"product_id":"avis-option-1718146053296-896729","title":"Unitronic Intake Adapter for MY19+ 2.5 TFSI EVO","description":null,"brand":"Unitronic","offers":[{"title":"Default Title","offer_id":48982840279342,"sku":"","price":76.99,"currency_code":"USD","in_stock":true}]},{"product_id":"unitronic-intercooler-upgrade-for-mk8-gti-r","title":"Unitronic Intercooler Upgrade for Mk8 GTI\/R","description":"\u003ch3\u003ePRODUCT DESCRIPTION:\u003c\/h3\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eUnitronic's Intercooler Upgrade Kit for vehicles equipped with the 2.0TSI EVO4 engines found in the MK8 GTI and Golf R, is a direct OEM replacement kit with the ability to support 600HP and more! Featuring a massive 23.5\" x 2\" x 16.5\" bar and plate intercooler core made from T5052 aluminum, T6061 cast aluminum end tanks, proprietary internal fin and louver configuration, and a TIG welded construction.\u003cbr\u003e\u003cbr\u003eUnitronic's Intercooler Upgrade Kit will resist heat-soak and provide optimal and efficient cooling in any driving conditions.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cbr\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch3 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eHighly efficient bar \u0026amp; plate intercooler core constructed of T5052 Aluminum\u003c\/li\u003e\n\u003cli\u003eDrastically reduces charge air temperature for cooler, more dense air\u003c\/li\u003e\n\u003cli\u003eSignificantly more resistant to heat-soak\u003c\/li\u003e\n\u003cli\u003eOver 60% more volume than OEM intercooler\u003c\/li\u003e\n\u003cli\u003eT6061 cast Aluminum end tanks\u003c\/li\u003e\n\u003cli\u003eWeight 24.4 lbs\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement; no bumper, radiator support, or other trimming required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch3 class=\"textTitle\"\u003eHardware Included\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnitronic Direct Fit Intercooler Core for the MK8 GTI and Golf R equipped with the 2.0TSI EVO4 engines.\u003c\/li\u003e\n\u003cli\u003eAll installation hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":49035930763566,"sku":"UH023-ICA","price":769.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/img_34673mk8gtirblackintercoolerweb.jpg?v=1718807368"},{"product_id":"unitronic-intercooler-and-charge-pipe-kit-for-mk8-golf-r","title":"Unitronic Intercooler and Charge Pipe Kit for Mk8 Golf R","description":"\u003ch3\u003ePRODUCT DESCRIPTION:\u003c\/h3\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eUnitronic's Intercooler and Charge Pipe Upgrade Kit for the MK8 Golf R® 2.0TSI® EVO4 is a direct OEM replacement kit with the ability to support 600HP and more.\u003cbr\u003e\u003cbr\u003eThis kit features a massive 23.5\" x 2\" x 16.5\" bar and plate intercooler core made from T5052 aluminum and T6061 cast aluminum end tanks with proprietary internal fin and louver configuration. An upgraded turbo discharge pipe, throttle body pipe, silicone turbo outlet hose, silicone throttle body hose and silicone intercooler inlet\/outlet hose is also included with this bundle.\u003cbr\u003e\u003cbr\u003eCombined, this complete kit will help resist heat-soak and provide optimal and efficient cooling in any driving condition while eliminating restrictions in the boost (charge) piping which runs from the turbocharger to the engine, allowing for unrestricted airflow and maximum performance.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cbr\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch3 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eHighly efficient bar \u0026amp; plate intercooler core constructed of T5052 Aluminum\u003c\/li\u003e\n\u003cli\u003eDrastically reduces charge air temperature for cooler, more dense air\u003c\/li\u003e\n\u003cli\u003eSignificantly more resistant to heat-soak\u003c\/li\u003e\n\u003cli\u003eOver 60% more volume than OEM intercooler\u003c\/li\u003e\n\u003cli\u003eT6061 cast Aluminum end tanks\u003c\/li\u003e\n\u003cli\u003eIntercooler Weight: 24.4 lbs\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement; no bumper, radiator support, or other trimming required\u003c\/li\u003e\n\u003cli\u003eLightweight Aluminum Charge Pipe tubing\u003c\/li\u003e\n\u003cli\u003e60mm Internal Charge Pipe Diameter\u003c\/li\u003e\n\u003cli\u003eOEM DV port connection maintained\u003c\/li\u003e\n\u003cli\u003eSmooth airflow transitions\u003c\/li\u003e\n\u003cli\u003eMulti-ply reinforced silicone hoses\u003c\/li\u003e\n\u003cli\u003eFluorolined inner layer on silicone hoses for oil penetration resistance\u003c\/li\u003e\n\u003cli\u003eFactory wiring harness mounting points\u003c\/li\u003e\n\u003cli\u003e1\/8” NPT Water\/Meth injection port w\/ plug\u003c\/li\u003e\n\u003cli\u003eIntegrated MAP sensor bung\u003c\/li\u003e\n\u003cli\u003eDurable wrinkle black powder coated finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch3 class=\"textTitle\"\u003eHardware Included\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnitronic Direct Fit Intercooler Core for the MK8 Golf R\u003c\/li\u003e\n\u003cli\u003eThrottle Body Pipe\u003c\/li\u003e\n\u003cli\u003eTurbo Discharge Pipe\u003c\/li\u003e\n\u003cli\u003eSilicone Turbo Outlet Hose\u003c\/li\u003e\n\u003cli\u003eSilicone Throttle Body Hose\u003c\/li\u003e\n\u003cli\u003eSilicone Intercooler Hoses\u003c\/li\u003e\n\u003cli\u003eHigh Quality Hose Clamps and Installation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":49035934761262,"sku":"UH032-ICA","price":1199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/dsc080042bundleintercooleruh026icachargepipesmk8r8yweb.jpg?v=1718807509"},{"product_id":"unitronic-intercooler-upgrade-with-charge-pipe-kit-for-mk8-gti","title":"Unitronic Intercooler Upgrade with Charge Pipe Kit for Mk8 GTI","description":"\u003ch3\u003ePRODUCT DESCRIPTION:\u003c\/h3\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eUnitronic's Intercooler and Charge Pipe Upgrade Kit for the MK8 GTI® 2.0TSI® EVO4 is a direct OEM replacement kit with the ability to support 600HP and more.\u003cbr\u003e\u003cbr\u003eThis kit features a massive 23.5\" x 2\" x 16.5\" bar and plate intercooler core made from T5052 aluminum and T6061 cast aluminum end tanks with proprietary internal fin and louver configuration. An upgraded turbo discharge pipe, throttle body pipe, silicone turbo outlet hose, silicone throttle body hose and silicone intercooler inlet\/outlet hose is also included with this bundle.\u003cbr\u003e\u003cbr\u003eCombined, this complete kit will help resist heat-soak and provide optimal and efficient cooling in any driving condition while eliminating restrictions in the boost (charge) piping which runs from the turbocharger to the engine, allowing for unrestricted airflow and maximum performance.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cbr\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch3 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eHighly efficient bar \u0026amp; plate intercooler core constructed of T5052 Aluminum\u003c\/li\u003e\n\u003cli\u003eDrastically reduces charge air temperature for cooler, more dense air\u003c\/li\u003e\n\u003cli\u003eSignificantly more resistant to heat-soak\u003c\/li\u003e\n\u003cli\u003eOver 60% more volume than OEM intercooler\u003c\/li\u003e\n\u003cli\u003eT6061 cast Aluminum end tanks\u003c\/li\u003e\n\u003cli\u003eIntercooler Weight: 24.4 lbs\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement; no bumper, radiator support, or other trimming required\u003c\/li\u003e\n\u003cli\u003eLightweight Aluminum Charge Pipe tubing\u003c\/li\u003e\n\u003cli\u003e60mm Internal Charge Pipe Diameter\u003c\/li\u003e\n\u003cli\u003eSmooth airflow transitions\u003c\/li\u003e\n\u003cli\u003eMulti-ply reinforced silicone hoses\u003c\/li\u003e\n\u003cli\u003eFluorolined inner layer on silicone hoses for oil penetration resistance\u003c\/li\u003e\n\u003cli\u003eFactory wiring harness mounting points\u003c\/li\u003e\n\u003cli\u003e1\/8” NPT Water\/Meth injection port w\/ plug\u003c\/li\u003e\n\u003cli\u003eIntegrated MAP sensor bung\u003c\/li\u003e\n\u003cli\u003eDurable wrinkle black powder coated finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch3 class=\"textTitle\"\u003eHardware Included\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnitronic Direct Fit Intercooler Core for the MK8 GTI\u003c\/li\u003e\n\u003cli\u003eThrottle Body Pipe\u003c\/li\u003e\n\u003cli\u003eTurbo Discharge Pipe\u003c\/li\u003e\n\u003cli\u003eSilicone Turbo Outlet Hose\u003c\/li\u003e\n\u003cli\u003eSilicone Throttle Body Hose\u003c\/li\u003e\n\u003cli\u003eSilicone Intercooler Hoses\u003c\/li\u003e\n\u003cli\u003eHigh Quality Hose Clamps and Installation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":49035940790574,"sku":"UH033-ICA","price":1399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/dsc079983bundleintercooleruh027icachargepipesmk8gtiweb.jpg?v=1718807633"},{"product_id":"unitronic-mpi-fuel-rail-upgrade-kit-w-o-injectors-for-mqb-2-0tsi-ea888-evo4","title":"Unitronic MPI Fuel Rail Upgrade Kit w\/o Injectors for MQB 2.0TSI EA888 EVO4","description":"\u003ch3\u003ePRODUCT DESCRIPTION:\u003c\/h3\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eThis MPI Upgrade Kit allows you to add port side fuel injectors to the factory 2.0TSI EA888 EVO4 intake manifold and features uncompromised, top shelf components which were carefully designed, manufactured and assembled by Unitronic.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE: This kit does not contain port-side fuel injectors, this kit is for anyone using a different tuner that has other port injector preferences.\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eLearn more about our Fueling Upgrades for the 2.0TSI EVO4 platform\u003cspan\u003e \u003c\/span\u003e\u003cb\u003e\u003ca href=\"https:\/\/www.getunitronic.com\/news\/unitronic-fueling-upgrades-ea888-evo4\" target=\"_tab\"\u003eHERE\u003c\/a\u003e\u003c\/b\u003e.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cbr\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch4 class=\"textTitle\"\u003eHardware Included\u003c\/h4\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnitronic CNC-Machined Billet Aluminum Fuel Rail\u003c\/li\u003e\n\u003cli\u003eGenuine Bosch Motorsport Fuel Pressure Sensor\u003c\/li\u003e\n\u003cli\u003eGenuine Continental Ethanol Content Sensor\u003c\/li\u003e\n\u003cli\u003ePremium Fuel Lines, Pinch Clamps and Hardware\u003c\/li\u003e\n\u003cli\u003ePlug and Play Wiring Harness for Simple Installation\u003c\/li\u003e\n\u003cli\u003ePrecision Drill Bit and Guide for OEM Intake Manifold Preparation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":49080380424494,"sku":"UH015-FLA","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/img_34963cropmk8mqb2noinjectorsweb.jpg?v=1719547083"},{"product_id":"unitronic-mk6-jetta-gli-1-8-2-0-tsi-gen3-3-turbo-back-exhaust-system","title":"Unitronic MK6 Jetta\/GLI 1.8\/2.0 TSI Gen3 3\" Turbo-Back Exhaust System","description":"\u003ch3\u003ePRODUCT DESCRIPTION:\u003c\/h3\u003e\n\u003cdiv class=\"block blockOdd\"\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003e3-inch T304 Stainless Steel Mandrel Bent Tubing:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eQuality Material that will not rust and will outlast your vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eT316 stainless steel v-band flange flanges:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eDurable and rust proof.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eDirect Bolt-On Fitment:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eUse all factory exhaust hanger and doesn’t require any modification or adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eLocked V-band Rotation:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eSecuring downpipe to the engine assure no possible v-band flange rotation during hard acceleration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eFactory catalyst position:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eAssure maximum efficiency of the catalytic converter in line with OEM catalytic converter warm up strategy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003e200-cell metallic matrix high-flow catalyst:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eHighly durable Matrix allowing minimal power loss while assuring maximum efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eOEM-inspired catalytic converter heat shield:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eHelp to reduce radiant heat in the engine bay.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003e80mm to 76.2mm turbo to downpipe transition:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eAssure a smooth flow transition between Turbine housing and 3” Stainless steel piping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eOEM Oxygen sensor placement:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eNo need for O2 sensor extension or modification of the wiring harness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003e4-inch Corrugated stainless steel flex section:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eHigh quality flex that will stay leak proof for years. It allows engine movement without stressing the factory rubber mounts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eTIG welded construction:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eProfessionally hand welded to assure longevity and leak proof.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eUnique v-band fastening system featuring Clampco® clamps:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eMaintain a perfect alignment every time while insuring a leak proof connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eSound Reflection Chamber Technology:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eSound reflection chamber used to cancel unwanted sound frequency and ensure a deep tone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eSound Absorption Technology:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003ePerforated chamber packed with High quality and durable high temperature Fiberglass wool. Ensure a deep tone and unwanted frequency absorption.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eStraight-Through, Free Flowing Muffler Design:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eOptimal performance achieved by removing restriction and reducing back pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003ePolished 3.5-inch Slash Cut Exhaust Tips:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eMirror polished tips engraved with the Unitronic logo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch4 class=\"textTitle\"\u003eHardware Included\u003c\/h4\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnitronic 1.8\/2.0 TSI Gen3 Downpipe\u003c\/li\u003e\n\u003cli\u003eUnitronic 3\" Axle Pipe w\/ Muffler\u003c\/li\u003e\n\u003cli\u003eUnitronic 3\" Mid-Pipe w\/ Muffler\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.getunitronic.com\/parts\/exhausts\/3in-vband-clamp\"\u003eUnitronic 3\" V-Band Exhaust Clamps (4x)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eUnitronic 3\" V-Band Sealing Rings (4x)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.getunitronic.com\/parts\/exhausts\/3in-vband-adapter\"\u003eUnitronic 3\" V-Band Adapter Link\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eAll Necessary Hardware Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch4 class=\"textTitle\"\u003eRecommended Software\u003c\/h4\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eStage 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"block blockOdd\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch4 class=\"textTitle\"\u003eInstall\u003c\/h4\u003e\n\u003cdiv class=\"textDescription\"\u003eUnitronic's 3\" Turbo-Back Exhaust System fits MK6 Jetta\/GLI 1.8\/2.0 TSI Gen3. Featuring a unique v-band fastening system and engineered using the latest in 3D modeling technology, Unitronic Performance Exhaust Systems are made easy to install.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":49085794386222,"sku":"UH023-EXA","price":1649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/unitronic_mk6_gli_turboback_1web1.jpg?v=1719689253"},{"product_id":"unitronic-charge-pipes-for-ea888-gen-3-mqb","title":"Unitronic Charge Pipes for EA888 Gen 3 MQB","description":"\u003ch3\u003ePRODUCT DESCRIPTION:\u003c\/h3\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eUnitronic's Charge Pipe Upgrade Kit for vehicles equipped with the 1.8\/2.0 TSI MQB engines is comprised of an upgraded Turbo Discharge Pipe, Throttle Body Pipe, and silicone intercooler inlet\/outlet hoses. This complete upgrade kit features a high-flow design that eliminates restrictions in the boost (charge) piping leading from the turbocharger outlet to the engine, allowing for unrestricted airflow.\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cbr\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch4 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h4\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003e60mm Internal Diameter (I.D.)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLightweight Aluminum tubing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSmooth airflow transitions\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMulti-ply reinforced silicone hoses\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFluorolined inner layer on silicone hoses for oil penetration resistance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFactory wiring harness mounting points\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1\/8” NPT Water\/Meth injection port w\/ plug\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntegrated MAP sensor bung\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDurable wrinkle black powder coated finish\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cbr\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch4 class=\"textTitle\"\u003eHardware Included\u003c\/h4\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle Body Pipe\u003c\/li\u003e\n\u003cli\u003eTurbo Discharge Pipe\u003c\/li\u003e\n\u003cli\u003eSilicone Intercooler Inlet\/Outlet hoses\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"textTitle\"\u003e\u003c\/div\u003e\n\u003ch4 class=\"textTitle\"\u003eInstall\u003c\/h4\u003e\n\u003cdiv class=\"textDescription\"\u003eThe Unitronic Charge Pipe Upgrade Kit for vehicles equipped with the 1.8\/2.0 TSI Gen3 (MQB) is designed to be simple to install with all the hardware necessary included. Installation time will take approximately two hours including the removal of the factory system and installation of your new Charge Pipes.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":49111087513902,"sku":"UH018-ICA","price":384.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/unitronicchargepipesforgen3tsimqb_uh018ica.jpg?v=1720225594"},{"product_id":"unitronic-charge-pipe-kit-for-mk8-gti","title":"Unitronic Charge Pipe Kit for Mk8 GTI","description":"\u003ch3\u003ePRODUCT DESCRIPTION:\u003c\/h3\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eThe Unitronic Charge Pipe Upgrade Kit for the MK8 GTI® is comprised of an upgraded turbo discharge pipe, throttle body pipe, silicone turbo outlet hose, silicone throttle body hose and silicone intercooler inlet\/outlet hoses.\u003cbr\u003e\u003cbr\u003eCombined, this kit features a high-flow design that eliminates restrictions in the boost (charge) piping which runs from the turbocharger outlet to the engine, allowing for unrestricted airflow and maximum performance.\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch4 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h4\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003e60mm Internal Diameter (I.D.)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLightweight Aluminum tubing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSmooth airflow transitions\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMulti-ply reinforced silicone hoses\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFluorolined inner layer on silicone hoses for oil penetration resistance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFactory wiring harness mounting points\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1\/8” NPT Water\/Meth injection port w\/ plug\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntegrated MAP sensor bung\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDurable wrinkle black powder coated finish\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch4 class=\"textTitle\"\u003eHardware Included\u003c\/h4\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle Body Pipe\u003c\/li\u003e\n\u003cli\u003eTurbo Discharge Pipe\u003c\/li\u003e\n\u003cli\u003eSilicone Turbo Outlet Hose\u003c\/li\u003e\n\u003cli\u003eSilicone Throttle Body Hose\u003c\/li\u003e\n\u003cli\u003eSilicone Intercooler Hoses\u003c\/li\u003e\n\u003cli\u003eHigh Quality Hose Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":49192929526062,"sku":"UH027-ICA","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/20tsievo4mk8gtichargepipehighlights3web.jpg?v=1721786233"},{"product_id":"unitronic-intercooler-upgrade-kit-for-b9-b9-5-s4-s5","title":"Unitronic Intercooler Upgrade Kit for B9\/B9.5 S4\/S5","description":"\u003ch2\u003ePRODUCT DESCRIPTION:\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003ePerfectly designed to fit vehicles equipped with 3.0 TFSI EA839 engines, this Unitronic Intercooler Upgrade Kit is a direct OEM replacement kit featuring an over-sized 21.65” x 16.61” x 2.52” bar and plate intercooler core made from cast aluminum core and end tanks, proprietary internal fin and louver configuration, and a TIG welded construction.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eUnitronic's Intercooler Upgrade Kit will resist heat-soak and provide optimal and efficient cooling in any driving condition.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eHighly efficient bar \u0026amp; plate intercooler core\u003c\/li\u003e\n\u003cli\u003eDrastically reduces charge air temperature for cooler, more dense air\u003c\/li\u003e\n\u003cli\u003eSignificantly more resistant to heat-soak\u003c\/li\u003e\n\u003cli\u003e79% more volume than OEM (Unitronic Core Dimensions: 21.65” x 16.61” x 2.52” \/ 550.0mm x 421.9mm x 64.0mm)\u003c\/li\u003e\n\u003cli\u003eCast Aluminum core and end tanks\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement; no bumper, radiator support, or other trimming required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eHardware Included\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnitronic Direct Fit Intercooler Core for vehicles equipped with 3.0 TFSI EA839 engines.\u003c\/li\u003e\n\u003cli\u003eAll required hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eRecommended Software\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eStage 1\u003c\/li\u003e\n\u003cli\u003eStage 1+\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAt Unitronic, development begins with setting the objectives; performance, efficiency, aesthetics and quality. Operations start with 3D scanning the 3.0 TFSI EA839 engine bay and OEM components with its in-house 3D scanner. Once 3D scan data has been collected and processed, Unitronic Hardware Engineers then interact with the 3D models to identify fitment constraints, mounting locations, other component locations, etc. to ensure the final product fits perfectly within the “envelope”.\u003c\/p\u003e\n\u003cp\u003eDesign and Engineering begins with the evolution of the design in meeting the objectives. Criteria from a top level is first met with the platform's design constraints; breaking it down to the details in optimizing the design. With upfront engineering fluid dynamics (EFD), Unitronic is able to hone in and refine the areas that are most effective in meeting those objectives.\u003c\/p\u003e\n\u003cp\u003eWith the ability to perform different iterations from design changes we are also able to accurately predict performance on how the design will perform. Above is a predictive simulation plot operating within the same conditions it was tested in. Results illustrate and validate the actual data collected.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eCore \u0026amp; End Tanks\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eUnitronic’s bar and plate intercooler core is constructed of cast aluminum featuring a unique staggered and louvered fin configuration to maximize efficiency, significantly reducing charge air temperatures allowing for cooler, more dense air to be ingested by the engine; ultimately resulting in an increase in engine performance. When intake air temperatures reach a specific threshold, the engine control unit begins to compensate to account for the air temperature, resulting in a decrease in performance. Unitronic’s core has 79% more volume than stock measuring 21.65” x 16.61” x 2.52”, allowing for a greater volume of air to exchange heat, which, combined with a proper fin configuration, allows for maximum efficiency and reduction in heat-soak thresholds without producing a significant pressure drop.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eTesting Data\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eUtilizing its own B9 Audi® S4® for research and development provided Unitronic with an in-house platform to run through testing. Data was collected on its in-house MAHA Chassis Dynamometer, using our standard cooling fans with ducting properly aligned with the front end of the vehicle. The vehicle's front bumper\/fascia was fully affixed for all tests. All data was collected on the same day, starting with the OEM intercooler testing first.\u003c\/p\u003e\n\u003cp\u003eAmbient air temperature was stable at 63°F (17°C) throughout the day. Testing consisted of 6 consecutive dyno pulls with a 20 second pull and a 30 second cool down period in between runs, with both the OEM and Unitronic Intercoolers to collect intake air temperatures to provide data on cooling abilities, efficiency, and resistance to heat soak compared to the OEM unit.\u003c\/p\u003e\n\u003cp\u003eThe graph above shows the Intake Air Temperature for both the OEM and Unitronic Intercoolers, individually for each of the 6 runs. The Unitronic Intercooler provided significant reductions in air temperature resulting in a cooler, denser charge air being ingested by the engine, resulting in increased performance. It's resistance to heat soak means that the core retains its cooling abilities, even though the most rigorous of conditions.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eDirect Bolt-On Fitment\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eEntering and exiting the core is an important aspect that should not be forgotten about. With airflow and fitment implications, Unitronic went through many end tank prototypes and production samples prior to approving this Intercooler for production. Unitronic's cast Aluminum end tanks are designed with tolerances of +\/- 0.020” to ensure perfect fitment across all of our production units. Inlet and outlet design has also been optimized to ensure smooth airflow through the intercooler and features barbed\/serrated bead rolled machining to ensure the charge hoses stay securely affixed.\u003c\/p\u003e\n\u003cp\u003eLike all Unitronic Performance Hardware, this Intercooler offers direct bolt-on fitment, retaining the factory mounting locations in order to simplify the installation process.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":49225313878318,"sku":"UH017-ICA","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/uh017icaunitronicb9intercoolerinstalled.jpg?v=1722654192"},{"product_id":"unitronic-carbon-fiber-inlet-for-b9-b9-5-s4-s5","title":"Unitronic Carbon Fiber Inlet for B9\/B9.5 S4\/S5","description":"\u003ch2\u003ePRODUCT DESCRIPTION:\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThis Carbon Fiber Turbo Inlet for the B9 and B9.5 Audi S4 and S5 is designed to dramatically improve airflow with massive gains over stock while supporting both the stock turbocharger and hybrid turbochargers via Unitronic's clever 53mm and 65.7mm adapter rings.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eConstructed of high quality carbon fiber, this new B9 S4 Turbo Inlet and B9 S5 Turbo Inlet features a large 85mm bore and smooth transitions to draw massive amounts of non-turbulent air from the airbox. A factory style PCV connection is maintained for OEM-level fitment as well.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003e2\/2 Twill prepreg carbon fiber weave\u003c\/li\u003e\n\u003cli\u003eAutoclave construction\u003c\/li\u003e\n\u003cli\u003eUp to 57% more airflow than stock\u003c\/li\u003e\n\u003cli\u003eModular adapter rings (53mm or 65.7mm) for the stock turbocharger or TheTurboEngineers TTE710 \/ TTE810 hybrid turbochargers\u003c\/li\u003e\n\u003cli\u003eHigh-quality stainless steel hose clamps\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment with OEM Mounting Locations\u003c\/li\u003e\n\u003cli\u003eSmooth airflow transitions\u003c\/li\u003e\n\u003cli\u003eProven airflow gains\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eHardware Included\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Fiber Turbo Inlet\u003c\/li\u003e\n\u003cli\u003eAll Necessary Hardware\u003c\/li\u003e\n\u003cli\u003eInlet Adapter Ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eRecommended Software\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eStage 1\u003c\/li\u003e\n\u003cli\u003eStage 1+\u003c\/li\u003e\n\u003cli\u003eStage 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"textTitle\"\u003eProven Airflow Gains\u003c\/h2\u003e\n\u003cdiv class=\"textTitle\"\u003e\u003cspan\u003eUnitronic Hardware Engineers carefully benchmarked the OEM Audi S4 \u0026amp; S5 turbo inlet versus the Unitronic Turbo Inlet in a controlled environment using our in-house Superflow SF-1020 flow bench. Our team observed massive air flow gains with the Unitronic Turbo Inlet. This drastic air flow improvement allows the turbocharger to work more efficiently and achieve target boost with less stress resulting in improved reliability.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"textTitle\"\u003e\n\u003cdiv class=\"textTitle\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"textTitle\"\u003eDesigned and Tested In-House\u003c\/h2\u003e\n\u003cdiv class=\"textTitle\"\u003e\u003cspan\u003eAt Unitronic, hardware evolution begins with rapid prototyping utilizing their in-house Stratasys 3D printer. Within hours, Unitronic Engineers are able to have a complete working printed prototype, allowing for test fitments to be performed on the vehicle, functional testing to be completed and flow data collected to further validate the designs.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":49225371058478,"sku":"UH044-INA","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/dsc069715b9s4inletweb.jpg?v=1722654843"},{"product_id":"unitronic-carbon-fiber-intake-system-with-inlet-for-b9-b9-5-s4-s5","title":"Unitronic Carbon Fiber Intake System with Inlet for B9\/B9.5 S4\/S5","description":"\u003ch2\u003ePRODUCT DESCRIPTION:\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThis Carbon Fiber Intake System and Turbo Inlet for the B9 and B9.5 Audi S4 and S5 is designed to dramatically improve airflow over the factory equipment while supporting both the stock turbocharger and hybrid turbochargers via Unitronic's clever 53mm and 65.7mm adapter rings.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eAs with all Unitronic Intake Systems, this unit provides improved throttle response, seamless integration and perfect fitment while greatly enhancing turbo induction sounds. Its stunning 2\/2 twill carbon fiber weave adds a striking presence in the 3.0TFSI engine bay as well.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003e2\/2 Twill prepreg carbon fiber weave\u003c\/li\u003e\n\u003cli\u003eAutoclave construction\u003c\/li\u003e\n\u003cli\u003eModular adapter rings (53mm or 65.7mm) for stock turbochargers or TTE710 \/ TTE810 hybrid turbochargers\u003c\/li\u003e\n\u003cli\u003eEPDM couplers\u003c\/li\u003e\n\u003cli\u003eHigh-quality stainless steel hose clamps\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment with OEM Mounting Locations \u0026amp; EPDM mounting grommets\u003c\/li\u003e\n\u003cli\u003eSmooth airflow transitions\u003c\/li\u003e\n\u003cli\u003eProven airflow gains\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eHardware Included\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnitronic Carbon Fiber Airbox\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Air Duct\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Transition Tube\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Turbo Inlet\u003c\/li\u003e\n\u003cli\u003eEPDM Flex Coupler\u003c\/li\u003e\n\u003cli\u003e6\" Tapered Cone Air Filter\u003c\/li\u003e\n\u003cli\u003eAll Necessary Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eRecommended Software\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eStage 1\u003c\/li\u003e\n\u003cli\u003eStage 1+\u003c\/li\u003e\n\u003cli\u003eStage 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"textTitle\"\u003eOptimized Airflow\u003c\/h2\u003e\n\u003cdiv class=\"textTitle\"\u003e\u003cspan\u003eTo validate its form through function; Unitronic engineers strategically used CFD to maximize the efficiency of this Intake System. After countless hours of test fitments and product validations through several iterations, the result is a design that maximizes the room available in the engine bay while exhibiting smooth volumetric transitions where every facet is effectively executed for form and function.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"textTitle\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/www.getunitronic.com\/hardware\/images\/UH043-INA\/optimizedairflow\/b9s430tturboinletflow3web.jpg\" alt=\"b9s430tturboinletflow3web.jpg\" width=\"534\" height=\"356\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"textTitle\"\u003e\n\u003ch2 class=\"textTitle\"\u003eProven Airflow Gains\u003c\/h2\u003e\n\u003cdiv class=\"textTitle\"\u003e\u003cspan\u003eUnitronic Hardware Engineers carefully benchmarked the OEM Audi S4 \/ S5 turbo inlet versus the Unitronic Turbo Inlet in a controlled environment using our in-house Superflow SF-1020 flow bench. Our team observed massive air flow gains of up to 57% with the Unitronic Intake and Turbo Inlet. This drastic air flow improvement allows the turbochargers to work more efficiently and achieve target boost with less stress resulting in improved reliability.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":49225393570094,"sku":"UH043-INA","price":1409.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/dsc070112b9s4inletweb.jpg?v=1722655271"},{"product_id":"unitronic-intake-system-for-audi-b9-b9-5-s4-s5","title":"Unitronic Intake System for Audi B9\/B9.5 S4\/S5","description":"\u003ch2\u003ePRODUCT DESCRIPTION:\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eUnitronic's all-new Carbon Fiber Intake System for the B9 3.0TFSI EA839 engines, found in the B9 Audi S4 and Audi S5, helps free up the intake restrictions of the OEM unit. It is engineered for seamless integration within the engine bay and improves the performance, look and sound of your vehicle.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBuilt with reinforced materials, high quality EPDM couplers and stainless steel hardware, this Intake System is more than capable of standing up to the rigors of track use or daily driving.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003e2\/2 Twill prepreg carbon fiber weave\u003c\/li\u003e\n\u003cli\u003eAutoclave construction\u003c\/li\u003e\n\u003cli\u003eEPDM couplers\u003c\/li\u003e\n\u003cli\u003eHigh-quality stainless steel hose clamps\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment with OEM Mounting Locations \u0026amp; EPDM mounting grommets\u003c\/li\u003e\n\u003cli\u003eSmooth airflow transitions\u003c\/li\u003e\n\u003cli\u003eProven power, torque, and airflow gains\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eHardware Included\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnitronic Carbon Fiber Airbox\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Air Duct\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Transition Tube\u003c\/li\u003e\n\u003cli\u003eEPDM Flex Coupler\u003c\/li\u003e\n\u003cli\u003e6\" Tapered Cone Air Filter\u003c\/li\u003e\n\u003cli\u003eAll Necessary Hardware Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"textTitle\"\u003eAirflow Optimization\u003c\/h2\u003e\n\u003cdiv class=\"textTitle\"\u003e\u003cspan\u003eTo validate its form through function; Unitronic engineers strategically used CFD to maximize its efficiency. Every aspect of the design was studied closely, iteration after iteration, until reaching the maximums governed by the laws of physics. The CFD simulations illustrate how well airflow travels through the system. The primary focus was to achieve laminar flow and minimal pressure drop in all areas of the design. The result of this is an increase in volumetric efficiency.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"textTitle\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/www.getunitronic.com\/hardware\/images\/UH017-INA\/airflowoptimization\/b9s4intakeflow1watermarked.jpg\" alt=\"b9s4intakeflow1watermarked.jpg\" width=\"528\" height=\"352\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"textTitle\"\u003e\n\u003ch2 class=\"textTitle\"\u003eImproved Flexibility\u003c\/h2\u003e\n\u003cdiv class=\"textTitle\"\u003e\u003cspan\u003eUnitronic high-quality EPDM silicone couplers offer a superior amount of flexibility over traditional silicone, while still offering the rigidity and strength needed to support high-powered 3.0TFSI’s. Unitronic’s engineers also created a design that allows for smooth, laminar airflow on the inside walls, while maintaining flexibility through the means of a non-collapsing structural rib profile. Unitronic's couplers are designed to perfectly align with the bead rolls on the carbon fiber tubes, to ensure a perfect and seamless connection; hose clamp guides ensure perfect alignment.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"textTitle\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/www.getunitronic.com\/hardware\/images\/UH017-INA\/improvedflexibility\/25intakeepdmwtrmrkd.jpg\" alt=\"25intakeepdmwtrmrkd.jpg\" width=\"450\" height=\"300\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"textTitle\"\u003e\n\u003ch2 class=\"textTitle\"\u003eProven Power and Torque Gains\u003c\/h2\u003e\n\u003cdiv class=\"textTitle\"\u003e\u003cspan\u003eUnitronic Engineers further validated designs to ensure that the Unitronic Carbon Fiber Intake System developed more power using its in-house MAHA Chassis Dynamometer. Unitronic was able to measure considerable horsepower and torque gains in tuned vehicle applications.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"textTitle\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"textTitle\"\u003e\n\u003ch2 class=\"textTitle\"\u003eImproved Aesthetics\u003c\/h2\u003e\n\u003cdiv class=\"textTitle\"\u003e\n\u003cdiv class=\"block\"\u003e\n\u003cdiv class=\"textWrapper\"\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eThe Unitronic Carbon Fiber Intake System offers superior fit and finish with a direct bolt-on fitment, retaining the factory mounting locations and simplifying the installation process using our very own mounting grommets.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"block blockOdd\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":49225410937134,"sku":"UH017-INA","price":1209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/uh017inainstalled1b9s4s5cfintakeunitronic.jpg?v=1722655683"},{"product_id":"unitronic-performance-downpipe-for-b9-b9-5-s4-s5","title":"Unitronic Performance Downpipe for B9\/B9.5 S4\/S5","description":"\u003ch2\u003ePRODUCT DESCRIPTION:\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe Unitronic Performance Downpipe for the 2017+ S4® \u0026amp; S5® 3.0TFSI® EA839 (CWG) engine is a direct bolt-on upgrade, designed to optimally eliminate unwanted restrictions in the factory downpipe, reduce turbo lag and enhance the exhaust note. It utilizes a 6” 400cpsi ultra high output catalytic converter, designed in partnership with Unitronic, from our emissions partners at Global Emissions Systems Inc (GESi®).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePaired with Unitronic Stage 2 Performance Software and other supporting bolt-ons, this Performance Downpipe helps yield up to \u003c\/span\u003e\u003cb\u003e467HP \/ 547LB-FT\u003c\/b\u003e\u003cspan\u003e on the 3.0TFSI equipped B9 S4 and S5.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWarranty Registration is \u003cb\u003eREQUIRED\u003c\/b\u003e for all products integrating GESi Catalyst(s) \u003ca href=\"https:\/\/www.getunitronic.com\/gesi-registration\" target=\"_tab\"\u003eHERE\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eGESi 6” G-Sport Ultra High Output UHOX 400cpsi Catalytic Converter\u003c\/li\u003e\n\u003cli\u003e6\" to 4.5\" post-cat transition with T304 Stainless Steel tubing\u003c\/li\u003e\n\u003cli\u003eTIG-welded construction\u003c\/li\u003e\n\u003cli\u003eOEM-style thermal isolation\/heat shielding\u003c\/li\u003e\n\u003cli\u003eFactory catalyst placement for maximum efficiency\u003c\/li\u003e\n\u003cli\u003eProper factory Oxygen Sensor placement maintained\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment\u003c\/li\u003e\n\u003cli\u003eEnhanced exhaust note\u003c\/li\u003e\n\u003cli\u003eCompatible with the factory cat-back exhaust system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eHardware Included\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnitronic Performance Downpipe Featuring a GESi 6” G-Sport Ultra High Output UHOX 400cpsi Catalytic Converter\u003c\/li\u003e\n\u003cli\u003eAll required installation hardware and gaskets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eRequired Software\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eStage 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":49227590598958,"sku":"UH044-EXA","price":2399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/dscf76332unib930downpipeweb.jpg?v=1722709379"},{"product_id":"unitronic-downpipe-for-1-8-2-0-ea888-gen-3-non-mqb","title":"Unitronic Downpipe for 1.8\/2.0 EA888 Gen 3 (Non-MQB)","description":"\u003ch2\u003ePRODUCT DESCRIPTION:\u003c\/h2\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eConstructed of 3\" T304 stainless steel mandrel bent tubing, T316 stainless steel flanges, a corrugated stainless steel flex section, and TIG welded fabrication, this downpipe is built to outlast and outperform the competition. All Unitronic downpipes come equipped with a 200-cell high flow metallic catalytic converter and all transitions are flow-matched to allow for maximum performance and airflow.\u003cbr\u003e\u003cbr\u003eIn addition, Unitronic exhausts feature easy-to-use v-band flanges to ensure a fast and effortless installation and precise fitment. To finish it off, an OEM-inspired catalytic converter heat-shield protects against unwanted heat radiating in the exhaust tunnel. Every Unitronic Exhaust System comes equipped with a brushed matte finish for an elegant appearance that will last a lifetime.\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003e3-inch T304 Stainless Steel Mandrel Bent Tubing:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eQuality Material that will not rust and will outlast your vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eT316 stainless steel v-band flange flanges:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eDurable and rust proof.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eDirect Bolt-On Fitment:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eUse all factory exhaust hanger and doesn’t require any modification or adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eLocked V-band Rotation:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eSecuring downpipe to the engine assure no possible v-band flange rotation during hard acceleration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eFactory catalyst position:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eAssure maximum efficiency of the catalytic converter in line with OEM catalytic converter warm up strategy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003e200-cell metallic matrix high-flow catalyst:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eHighly durable Matrix allowing minimal power loss while assuring maximum efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eOEM-inspired catalytic converter heat shield:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eHelp to reduce radiant heat in the engine bay.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003e80mm to 76.2mm turbo to downpipe transition:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eAssure a smooth flow transition between Turbine housing and 3” Stainless steel piping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eOEM Oxygen sensor placement:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eNo need for O2 sensor extension or modification of the wiring harness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003e4-inch Corrugated stainless steel flex section:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eHigh quality flex that will stay leak proof for years. It allows engine movement without stressing the factory rubber mounts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eTIG welded construction:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eProfessionally hand welded to assure longevity and leak proof.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eUnique v-band fastening system featuring Clampco® clamps:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eMaintain a perfect alignment every time while insuring a leak proof connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eHardware Included\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnitronic 1.8\/2.0 TSI Gen3 3\" Downpipe\u003c\/li\u003e\n\u003cli\u003eUnitronic 1.8\/2.0 TSI Gen3 3\" Catalytic Converter Section\u003c\/li\u003e\n\u003cli\u003eUnitronic 3\" V-Band Exhaust Clamps\u003c\/li\u003e\n\u003cli\u003eUnitronic 3\" V-Band to 60mm Female V-Band Adapter\u003c\/li\u003e\n\u003cli\u003eUnitronic 3\" V-Band Adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eRecommended Software\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eStage\u003cspan\u003e 2\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":49232427188526,"sku":"UH022-EXA","price":725.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/18_20_tsi_downpipe2v2web.jpg?v=1722904212"},{"product_id":"unitronic-intercooler-kit-for-1-8-2-0-gen-3-non-mqb","title":"Unitronic Intercooler Kit for 1.8\/2.0 Gen 3 (Non-MQB)","description":"\u003ch2\u003ePRODUCT DESCRIPTION:\u003c\/h2\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eUnitronic's Intercooler Upgrade Kit for the 1.8\/2.0 TSI Gen3 is a direct OEM replacement kit with the ability to support 600HP and more! Featuring a massive 23.5\" x 2\" x 16.5\" bar and plate intercooler core made from T5052 aluminum, T6061 cast aluminum end tanks, proprietary internal fin and louver configuration, and a TIG welded construction.\u003cbr\u003e\u003cbr\u003eUnitronic's Intercooler Upgrade Kit will resist heat-soak and provide optimal and efficient cooling in any driving conditions.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cbr\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eHighly efficient bar \u0026amp; plate intercooler core constructed of T5052 Aluminum\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces charge air temperature for maximum performance\u003c\/li\u003e\n\u003cli\u003eDrastically more resistant to heat-soak\u003c\/li\u003e\n\u003cli\u003eOver 60% more volume than factory intercooler\u003c\/li\u003e\n\u003cli\u003eT6061 cast Aluminum end tank design\u003c\/li\u003e\n\u003cli\u003eSufficient spacing between A\/C condenser and radiator\u003c\/li\u003e\n\u003cli\u003eCNC machined billet Aluminum OEM boost hose adapter\u003c\/li\u003e\n\u003cli\u003eMulti-ply flow-matched silicone hoses\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement; No bumper, radiator support, or other trimming required.\u003c\/li\u003e\n\u003cli\u003eFitment with models equipped with ozone sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eHardware Included\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnitronic Direct Fit 1.8\/2.0 TSI Gen3 Intercooler Core\u003c\/li\u003e\n\u003cli\u003eUnitronic 1.8\/2.0 TSI Gen3 Hose Kit\u003c\/li\u003e\n\u003cli\u003eUnitronic MK5\/MK6 Intercooler Bolt Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eRecommended Software\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eStage 1\u003c\/li\u003e\n\u003cli\u003eStage 1+\u003c\/li\u003e\n\u003cli\u003eStage 2 (If equipped with Unitronic's 3'' Downpipe)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":49232466575662,"sku":"UH006-ICA","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/18tsi_intercooler2.jpg?v=1722904962"},{"product_id":"unitronic-performance-downpipe-for-ea888-gen-4-evo-fwd","title":"Unitronic Performance Downpipe for EA888 Gen 4 EVO FWD","description":"\u003ch2\u003ePRODUCT DESCRIPTION:\u003c\/h2\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eThe Unitronic Performance Downpipe for the MK8 GTI® equipped with the 2.0TSI EA888 EVO4 engine is a direct bolt-on upgrade, designed to optimally eliminate unwanted restrictions in the factory downpipe, reduce turbo lag and enhance the exhaust note. It utilizes a 5” 400cpsi ultra high output (UHOX) catalytic converter, designed in partnership with Unitronic, from our emissions partners at Global Emissions Systems Inc (GESi).\u003cbr\u003e\u003cbr\u003ePaired with Unitronic Stage 2 E85 Performance Software and other supporting bolt-ons, this Performance Downpipe helps yield up to\u003cspan\u003e \u003c\/span\u003e\u003cb\u003e417HP \/ 426LB-FT\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003ewith more to come.\u003cbr\u003e\u003cbr\u003eWarranty Registration is\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eREQUIRED\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003efor all products integrating GESi Catalyst(s)\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.getunitronic.com\/gesi-registration\" target=\"_tab\"\u003eHERE\u003c\/a\u003e.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cbr\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eGESi 5” G-Sport UHOX 400cpsi Catalytic Converter\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds local testing standards\u003c\/li\u003e\n\u003cli\u003eCFD Optimized Upper Downpipe Castings\u003c\/li\u003e\n\u003cli\u003eTIG-welded construction\u003c\/li\u003e\n\u003cli\u003eFactory catalyst placement for maximum efficiency\u003c\/li\u003e\n\u003cli\u003eOxygen Sensor provision maintained\u003c\/li\u003e\n\u003cli\u003eOEM-style corrugated mesh flex bellow\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment\u003c\/li\u003e\n\u003cli\u003eEnhanced exhaust note\u003c\/li\u003e\n\u003cli\u003eReducers available for factory or upgraded cat-back systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eHardware Included\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnitronic Performance Downpipe Featuring GESi 5” G-Sport Ultra High Output UHOX 400cpsi Catalytic Converter\u003c\/li\u003e\n\u003cli\u003e2x V-band clamps and centering rings\u003c\/li\u003e\n\u003cli\u003e1x Stainless steel midpipe section\u003c\/li\u003e\n\u003cli\u003e1x Stainless steel exhaust reducer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eRequired Software\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eStage 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":49259681874222,"sku":"UH071-EXA","price":2099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/dsc026462unitronicmk8fwddownpipeweb.jpg?v=1723587419"},{"product_id":"unitronic-cat-back-for-mk8-gti","title":"Unitronic Cat-Back for Mk8 GTI","description":"\u003ch2\u003ePRODUCT DESCRIPTION:\u003c\/h2\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eThe Unitronic Cat-Back Exhaust System for the MK8 GTI® equipped with the 2.0TSI EVO4 engine features 3-inch T304 Stainless Steel mandrel bent tubing, high density, high temperature glass fiber packed mufflers and high quality v-band fasteners with T316 Stainless Steel flanges. Exiting at the rear, 4\" polished tips with engraved Unitronic logos are standard while 4\" black tips with engraved Unitronic logos are optional.\u003cbr\u003e\u003cbr\u003eThese attributes combined with extensive R\u0026amp;D testing, help ensure perfect fitment and maximum performance, while maintaining a comfortable but enhanced exhaust tone which isn't obtrusive inside the cabin of the MK8 GTI.\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003e3-inch T304 Stainless Steel Tubing:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eQuality Material that will not rust and will outlast your vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eT316 Stainless Steel V-Band Flanges:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eDurable, rustproof and cnc machined.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eDirect Bolt-On Fitment:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eUse all factory exhaust hanger and doesn’t require any modification or adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eTIG Welded Construction:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eProfessionally hand welded to ensure longevity, resistance and leak proof.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eUnique V-Band Fastening System Featuring Clampco® Clamps:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eMaintain a perfect alignment every time while insuring a leakproof connection every time. Fully reusable and quick install.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eStraight-Through, Free Flowing Muffler Design:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eOptimal performance achieved by removing restriction and reducing back pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eUniversal Fitment:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eCome with OEM size reducer for a direct bolt-on. Optional 3” adapter available for most after market exhaust system or 3” slip fit adjustable link to match to any Unitronic exhaust system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eSound Reflection Chamber Technology:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eSound reflection chamber used to cancel unwanted sound frequency and ensure a deep tone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eSound Absorption Technology:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003ePerforated chamber packed with High quality and durable high temperature Fiberglass wool. Assure a deep tone and unwanted frequency absorption.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003ePolished 4-inch Slash Cut Exhaust Tips:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eChrome polished tips engraved with the Unitronic logo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eOptional Black PVD 4-inch Slash Cut Exhaust Tips:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eAlso engraved with the Unitronic logo, these optional tips are easy to swap using a slip on design.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eHardware Included\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnitronic 3\" Axle Section\u003c\/li\u003e\n\u003cli\u003eUnitronic 3\" Mid-Pipe w\/ Resonator\u003c\/li\u003e\n\u003cli\u003eUnitronic 3\" Rear Section w\/ Muffler\u003c\/li\u003e\n\u003cli\u003eUnitronic 4\" Polished Chrome Slash Cut Tips\u003c\/li\u003e\n\u003cli\u003eUnitronic 3\" V-Band Exhaust Clamps\u003c\/li\u003e\n\u003cli\u003eUnitronic 3\" V-Band Sealing Rings\u003c\/li\u003e\n\u003cli\u003eUnitronic 3\" V-Band Adapter\u003c\/li\u003e\n\u003cli\u003eAll Necessary Hardware Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"textTitle\"\u003ePremium Components\u003c\/h2\u003e\n\u003cdiv class=\"testingDataImageWrapper\"\u003e\u003cimg class=\"modalImage\" src=\"https:\/\/www.getunitronic.com\/hardware\/images\/UH066-EXA\/premiumcomponents\/mk8gticbpolished8.jpg\" alt=\"mk8gticbpolished8.jpg\" width=\"455\" height=\"303\" onclick=\"unitronicOpenModalImage(this);\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eUnitronic mufflers feature high density, high temperature glass fiber packing and ensure maximum performance and a sportier sound are achieved while maintaining a comfortable tone inside the cabin.\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003ch2 class=\"textTitle\"\u003eSealing V-Band System\u003c\/h2\u003e\n\u003cdiv class=\"testingDataImageWrapper\"\u003e\u003cimg class=\"modalImage\" src=\"https:\/\/www.getunitronic.com\/hardware\/images\/UH066-EXA\/sealingvbandsystem\/vband_clamp_profile_v4bweb.jpg\" alt=\"vband_clamp_profile_v4bweb.jpg\" width=\"450\" height=\"300\" onclick=\"unitronicOpenModalImage(this);\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eUnitronic Exhaust Systems feature a unique sealing v-band fastening system, using T316 stainless steel flanges and a locking ring to guarantee a centric alignment which ensures a leak proof connection every time.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":49259684430126,"sku":"UH066-EXA","price":1209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/dsc068984cropmk8gticatbackexhaustweb.jpg?v=1723587725"},{"product_id":"unitronic-carbon-fiber-intake-system-with-air-duct-for-mk8-gti","title":"Unitronic Carbon Fiber Intake System with Air Duct for Mk8 GTI","description":"\u003ch2\u003ePRODUCT DESCRIPTION:\u003c\/h2\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eWith extensive background in engineering the finest in Performance Software, Unitronic developed an intake system that maximizes performance of the MK8 GTI equipped with the 2.0TSI EVO4 engine.\u003cbr\u003e\u003cbr\u003eThis translates into a complete Cold Air Intake System that is sure to perform to the maximum, providing increased power, air velocity, and throttle response, while also decreasing air intake temperatures and turbo lag. Unitronic's Carbon Fiber Air Duct also helps to increase power and air flow by taking advantage of both air inlets available in the OEM grill.\u003cbr\u003e\u003cbr\u003eIn addition, Unitronic's Cold Air Intake will enhance the sound of your turbocharger and diverter valve.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eOptimized Design for Maximum Performance:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eUnitronic specifically developed its air intake system to provide increased power, air velocity, and throttle response, while also decreasing air intake temperatures and turbo lag.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eQuality Silicone Components:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eHeavy duty, heat resistant and durable multi-ply silicone hose will not crack or tear overtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eStainless Steel Hardware:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eRust resistant hardware that will outlast your vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003e2\/2 Twill Prepreg Carbon Fiber Weave:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eHigh quality material to give you a lightweight, durable and resistant airbox.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eAutoclave Construction:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eThe curing process is completed in an autoclave to eliminate resin voids thus ensuring a strong component. A UV and heat resistant clear coat is then added on top of the carbon fiber to protect it against discoloration and give it a nice, smoot surface finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eProprietary 3-inch Filter:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eUnitronic’s proprietary 3\" dry cotton filter is engineered to maximize air flow with its radius base while keeping dust and foreign debris away from your engine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eOversized Airbox Air Inlet for Increased Airflow:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eAirflow capacity is increased when combined with Unitronic’s Carbon Fiber Air Duct.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eSmooth Flow Transition:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eFerrule provision on air filter base to ensure a smooth and linear airflow transition between elements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eDirect Bolt-On Fitment with OEM Mounting Locations:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eUtilizes all OEM mounting locations through use of Unitronic’s proprietary EPDM rubber mounting grommets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eEnhanced Turbocharger Sound:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eUnitronic’s Cold Air Intake Systems feature an open element design which results in a more audible sound from your vehicle’s turbocharger and Diverter Valve (DV).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eDual Air Inlet:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eTake advantage of both air inlets available in the OEM grille and benefit from an increased air flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eAirbox Water Drainage Provision:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eOpen slots located at the bottom of airbox allow for the drainage of water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eHardware Included\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Fiber Air Box\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Air Duct\u003c\/li\u003e\n\u003cli\u003e3-inch Powdercoated Aluminum Inner Intake Tube\u003c\/li\u003e\n\u003cli\u003eMulti-ply Turbo Inlet Tube\u003c\/li\u003e\n\u003cli\u003eProprietary 3-inch Dry-Filter (Cotton)\u003c\/li\u003e\n\u003cli\u003eHardware Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eRelated Hardware\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eMK8 GTI Carbon Fiber Intake System by Unitronic\u003c\/li\u003e\n\u003cli\u003eUnitronic Carbon Fiber Air Duct for MK7\/8 \u0026amp; 8V\/8Y\u003c\/li\u003e\n\u003cli\u003eUnitronic Intercooler Upgrade for MK8 GTI\/R\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"textTitle\"\u003eInstall\u003c\/h2\u003e\n\u003cdiv class=\"textDescription\"\u003eThe Unitronic Carbon Fiber Intake System for the MK8 GTI equipped with the 2.0TSI EVO4 engine is designed to be simple to install with all necessary hardware included. Installation time will take approximately one hour including the removal of the factory intake and installation of your new intake system.\u003cbr\u003e\u003cbr\u003eA difficulty rating of 1 means that minimal tools and experience are required and those with a basic understanding of the vehicle should have no problem completing the installation.\u003cbr\u003e\u003cbr\u003eUnitronic products are designed to meet manufacturer tolerances and specifications with regard to installation ease. All of our products are developed to the highest fitment and finish standard to ensure they last the life of your vehicle.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":49260016828718,"sku":"UH038-INA","price":868.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/dscf66623mk88yintakeweb.jpg?v=1723600946"},{"product_id":"unitronic-carbon-fiber-intake-system-for-mk8-gti","title":"Unitronic Carbon Fiber Intake System for Mk8 GTI","description":"\u003ch2\u003ePRODUCT DESCRIPTION:\u003c\/h2\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eWith extensive background in engineering the finest in Performance Software, Unitronic developed an intake system that maximizes performance on the MK8 GTI equipped with the 2.0TSI EVO4 engine.\u003cbr\u003e\u003cbr\u003eThis translates into a complete Cold Air Intake System that is sure to perform to the maximum, providing increased air velocity, and throttle response, while also decreasing air intake temperatures and turbo lag.\u003cbr\u003e\u003cbr\u003eIn addition, Unitronic's Cold Air Intake will enhance the sound of your turbocharger and diverter valve.\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cbr\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eOptimized Design for Maximum Performance:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eUnitronic specifically developed its air intake system to provide increased air velocity, and throttle response, while also decreasing air intake temperatures and turbo lag.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003e2\/2 Twill Prepreg Carbon Fiber Weave:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eHigh quality material to give you a lightweight, durable and resistant airbox.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eStainless Steel Hardware:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eRust resistant hardware that will outlast your vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eQuality Silicone Components:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eMulti ply silicone turbo inlet hose is strong enough to avoid collapsing when the engine is under hard acceleration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eAutoclave Construction:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eThe curing process is completed in an autoclave to eliminate resin voids thus ensuring a strong component. A UV and heat resistant clear coat is then added on top of the carbon fiber to protect it against discoloration and give it a nice, smooth surface finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eOversized Airbox Air Inlet for Increased Airflow:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eAirflow capacity is increased when combined with Unitronic’s Carbon Fiber Air Duct.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eEnhanced Turbocharger Sound:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eUnitronic’s Cold Air Intake Systems feature an open element design which results in a more audible sound from your vehicle’s turbocharger and Diverter Valve (DV).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eAirbox Water Drainage Provision:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eOpen slots located at the bottom of airbox allow for the drainage of water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eProprietary 3-inch Filter:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eUnitronic’s proprietary 3’’ dry cotton filter is engineered to maximize air flow with its radius base while keeping dust and foreign debris away from your engine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eSmooth Flow Transition:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eFerrule provision on air filter base to ensure a smooth and linear airflow transition between elements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eDirect Bolt-On Fitment with OEM Mounting Locations:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eUtilizes all OEM mounting locations through use of Unitronic’s proprietary EPDM rubber mounting grommets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"textTitle\"\u003eHardware Included\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003e3-inch Powdercoated Aluminum Inner Intake Tube\u003c\/li\u003e\n\u003cli\u003eMulti-ply Turbo Inlet Tube\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Box\u003c\/li\u003e\n\u003cli\u003eProprietary 3-inch Dry-Filter (Cotton)\u003c\/li\u003e\n\u003cli\u003eHardware Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"textTitle\"\u003eRelated Hardware\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Fiber Intake System with Air Duct For 2.0 TSI EVO4 MK8 GTI\u003c\/li\u003e\n\u003cli\u003eUnitronic Carbon Fiber Air Duct for MK7\/8 \u0026amp; 8V\/8Y\u003c\/li\u003e\n\u003cli\u003eUnitronic Intercooler Upgrade for MK8 GTI\/R\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"textTitle\"\u003eInstall\u003c\/h2\u003e\n\u003cdiv class=\"textDescription\"\u003eThe Unitronic Carbon Fiber Intake System for the MK8 GTI equipped with the 2.0TSI EVO4 engine is designed to be simple to install with all necessary hardware included. Installation time will take approximately one hour including the removal of the factory intake and installation of your new intake system.\u003cbr\u003e\u003cbr\u003eA difficulty rating of 1 means that minimal tools and experience are required and those with a basic understanding of the vehicle should have no problem completing the installation.\u003cbr\u003e\u003cbr\u003eUnitronic products are designed to meet manufacturer tolerances and specifications with regard to installation ease. All of our products are developed to the highest fitment and finish standard to ensure they last the life of your vehicle.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":49260024627502,"sku":"UH037-INA","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/dscf66614mk8intakeweb.jpg?v=1723601374"},{"product_id":"unitronic-carbon-fiber-intake-system-for-mk8-golf-r-8y-s3","title":"Unitronic Carbon Fiber Intake System for Mk8 Golf R \u0026 8Y S3","description":"\u003ch2\u003ePRODUCT DESCRIPTION:\u003c\/h2\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eWith extensive experience developing a multitude of new products for 2.0TSI EA888 EVO4 vehicles, Unitronic is proud to release this Carbon Fiber Intake System which helps maximize performance while offering perfect fitment on the MK8 Golf R and 8Y S3. Featuring an all-new silicone intake hose and aluminum coupler, this Carbon Fiber Intake System ensures precise fitment and a secure connection to the factory DV port on the MK8 Golf R and 8Y S3.\u003cbr\u003e\u003cbr\u003eUnitronic specifically developed this Intake System to provide increased performance, air velocity and throttle response through alleviating airflow restrictions. Turbocharger and diverter valve sounds will be enhanced as well.\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eOptimized Design for Maximum Performance:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eUnitronic specifically developed its Intake System to provide increased performance, air velocity and throttle response through alleviating airflow restrictions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003e2\/2 Twill Prepreg Carbon Fiber Weave:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eHigh quality material to give you a lightweight, durable and resistant airbox.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eStainless Steel Hardware:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eRust resistant hardware that will outlast your vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eQuality Silicone Components:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eMulti ply silicone turbo inlet hose is strong enough to avoid collapsing when the engine is under hard acceleration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eAutoclave Construction:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eThe curing process is completed in an autoclave to eliminate resin voids thus ensuring a strong component. A UV and heat resistant clear coat is then added on top of the carbon fiber to protect it against discoloration and give it a nice, smooth surface finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eOversized Airbox Air Inlet for Increased Airflow:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eAirflow capacity is greatly increased over stock while going one step further when combined with Unitronic’s Carbon Fiber Air Duct.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eEnhanced Turbocharger Sound:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eUnitronic’s Cold Air Intake Systems feature an open element design which results in a more audible sound from your vehicle’s turbocharger and Diverter Valve (DV).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eAirbox Water Drainage Provision:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eOpen slots located at the bottom of airbox allow for the drainage of water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eProprietary 3-inch Filter:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eUnitronic’s proprietary 3’’ dry cotton filter is engineered to maximize air flow with its radius base while keeping dust and foreign debris away from your engine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eSmooth Flow Transition:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eFerrule provision on air filter base to ensure a smooth and linear airflow transition between elements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eDirect Bolt-On Fitment with OEM Mounting Locations:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eUtilizes all OEM mounting locations through use of Unitronic’s proprietary EPDM rubber mounting grommets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"textTitle\"\u003eUnbeatable Fit and Finish\u003c\/h2\u003e\n\u003cdiv class=\"testingDataImageWrapper\"\u003e\u003cimg alt=\"dsc021183unitronicmk8golfr8ys3cfintakeweb.jpg\" src=\"https:\/\/www.getunitronic.com\/hardware\/images\/UH041-INA\/unbeatablefitandfinish\/dsc021183unitronicmk8golfr8ys3cfintakeweb.jpg\" class=\"modalImage\" width=\"491\" height=\"327\" onclick=\"unitronicOpenModalImage(this);\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eFeaturing an all-new silicone intake hose and aluminum coupler, this Carbon Fiber Intake System ensures precise fitment and a secure connection to the factory DV port on the MK8 Golf R and 8Y S3.\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003ch2 class=\"textTitle\"\u003eStriking Appearance and Performance\u003c\/h2\u003e\n\u003cdiv class=\"testingDataImageWrapper\"\u003e\u003cimg class=\"modalImage\" src=\"https:\/\/www.getunitronic.com\/hardware\/images\/UH041-INA\/strikingappearanceandperformance\/dsc020362bunitronicmk8golfr8ys3cfintakeweb.jpg\" alt=\"dsc020362bunitronicmk8golfr8ys3cfintakeweb.jpg\" width=\"500\" height=\"333\" onclick=\"unitronicOpenModalImage(this);\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eMade using 2\/2 Twill Prepreg Carbon Fiber and Autoclave Construction, this Intake System will withstand the test of time with built-in UV and heat resistant protection. Its smooth transitions and large openings help ensure peak performance is achieved and sustained as well.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"textTitle\"\u003eHardware Included\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Fiber Airbox\u003c\/li\u003e\n\u003cli\u003e3-inch Powdercoated Aluminum Inner Intake Tube\u003c\/li\u003e\n\u003cli\u003eMulti-ply Turbo Inlet Tube\u003c\/li\u003e\n\u003cli\u003eAluminum DV Port Coupler\u003c\/li\u003e\n\u003cli\u003eHardware Kit\u003c\/li\u003e\n\u003cli\u003eProprietary 3-inch Dry-Filter (Cotton)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"textTitle\"\u003eRelated Hardware\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Fiber Intake System with Air Duct for MK8 Golf R and 8Y S3 by Unitronic\u003c\/li\u003e\n\u003cli\u003eCat-Back Exhaust System for 8Y S3 by Unitronic\u003c\/li\u003e\n\u003cli\u003eCat-Back Exhaust System for MK8 Golf R by Unitronic\u003c\/li\u003e\n\u003cli\u003eUnitronic Carbon Fiber Air Duct for MK7\/8 \u0026amp; 8V\/8Y\u003c\/li\u003e\n\u003cli\u003eUnitronic Intercooler Upgrade for MK8 GTI\/R\u003c\/li\u003e\n\u003cli\u003eUnitronic Street DQ381 Dogbone Engine Mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"textTitle\"\u003eInstall\u003c\/h2\u003e\n\u003cdiv class=\"textDescription\"\u003eThe Unitronic Carbon Fiber Intake System for the MK8 Golf R and 8Y S3 equipped with the 2.0TSI EVO4 engine is designed to be simple to install with all necessary hardware included. Installation time will take approximately one hour including the removal of the factory intake and installation of your new intake system.\u003cbr\u003e\u003cbr\u003eUnitronic products are designed to meet manufacturer tolerances and specifications with regard to installation ease. All of our Hardware products are developed to the highest fit and finish standard to ensure they last the life of your vehicle and as such, they are backed by our limited lifetime warranty for the original purchaser as well.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Unitronic","offers":[{"title":"With Air Duct","offer_id":51963733410094,"sku":"UH042-INA","price":1124.99,"currency_code":"USD","in_stock":true},{"title":"No Air Duct","offer_id":51963733442862,"sku":"UH041-INA","price":709.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/dsc021684unitronicmk8golfr8ys3cfintakeweb.jpg?v=1776294499"},{"product_id":"unitronic-complete-fuel-system-upgrade-for-mk8-gti","title":"Unitronic Complete Fuel System Upgrade for Mk8 GTI","description":"\u003ch2\u003ePRODUCT DESCRIPTION:\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThis complete Fuel System Upgrade contains Unitronic's MPI Upgrade Kit and Unitronic's Low Pressure Fuel Pump (LPFP) solution for the MK8 GTI. This combination increases fuel flow and stability in order to maximize performance gains with our upcoming Stage 3 E85 Performance Software\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAs with all Unitronic Hardware Upgrades, this kit provides seamless integration which does not require any splicing, trimming or vehicle modification in order to complete the installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"textTitle\"\u003e\n\u003cstrong\u003eHardware Included\u003c\/strong\u003e:\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnitronic CNC-Machined Billet Aluminum Fuel Rail\u003c\/li\u003e\n\u003cli\u003eGenuine Bosch Motorsport 980CC Fuel Injectors\u003c\/li\u003e\n\u003cli\u003eGenuine Bosch Motorsport Fuel Pressure Sensor\u003c\/li\u003e\n\u003cli\u003eGenuine Continental Ethanol Content Sensor\u003c\/li\u003e\n\u003cli\u003ePremium Fuel Lines and Pinch Clamps\u003c\/li\u003e\n\u003cli\u003ePrecision Drill Bit and Guide for OEM Intake Manifold Preparation\u003c\/li\u003e\n\u003cli\u003eBrushless Low Pressure Fuel Pump and Basket\u003c\/li\u003e\n\u003cli\u003eBrushless Low Pressure Fuel Pump Controller\u003c\/li\u003e\n\u003cli\u003ePlug and Play Wiring Harnesses\u003c\/li\u003e\n\u003cli\u003eOEM Fuel Level Sender\u003c\/li\u003e\n\u003cli\u003eOEM LPFP Replacement Gasket\u003c\/li\u003e\n\u003cli\u003eAll required hardware and fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"textTitle\"\u003e\n\u003cstrong\u003eRequired Software\u003c\/strong\u003e:\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eMK8 GTI Stage 3 E85 Software\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":49303110910254,"sku":"UH019-FLA","price":1649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/IMG_3495-5-MK8-mqb2-Full-fueling-kit-crop-web__53772.jpg?v=1724640310"},{"product_id":"unitronic-intake-system-for-non-mqb-gen-3-ea888","title":"Unitronic Intake System for Non-MQB Gen 3 EA888","description":"\u003ch2\u003ePRODUCT DESCRIPTION:\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eWith extensive background in engineering the finest in Performance Software, Unitronic developed an intake system that maximizes performance. This translates into a complete Cold Air Intake System that is sure to perform to the maximum, providing increased power, air velocity, and throttle response, while also decreasing air intake temperatures and turbo lag. In addition, Unitronic's Cold Air Intake will enhance the sound of your turbocharger and diverter valve.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIntake Systems featuring a free flowing, open element design will result in a more audible sound from your vehicle's turbocharger. Additionally, due to the Diverter Valve (DV) being located directly on the compressor housing of the turbocharger, an audible resonance can be heard through the free flowing, open element design on this application, as illustrated with the associated diagram.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003e3-inch 6062 Aluminum Mandrel Bent Tubing:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eLightweight high quality material precisely engineered to ensure a perfect fitment in the engine bay.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eQuality Silicone Components:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eHeavy duty, heat resistant and durable 4-ply silicone reducers and 5-ply silicone couplers and elbows will not collapse under heavy acceleration. These quality hoses will not crack or tear overtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003ePowdercoat Finish:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eAluminum components are powdercoated to give them a long lasting surface finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eDirect Bolt-On Fitment with OEM Mounting Locations:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eUtilizes all OEM mounting locations on the engine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eSmooth Flow Transition:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eFerrule provision on air filter base to ensure a smooth and linear airflow transition between elements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eLightweight Heat Shield:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eHeat shield is made from 5051 Aluminum to reduce weight and to ensure hot air doesn’t make its way to the air filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eProprietary 3-inch Filter:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eUnitronic’s proprietary 3’’ dry cotton filter is engineered to maximize air flow with its radius base while keeping dust and foreign debris away from your engine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eEnhanced Turbocharger Sound:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eUnitronic’s Cold Air Intake Systems feature an open element design which results in a more audible sound from your vehicle’s turbocharger and Diverter Valve (DV).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eStainless Steel Hardware:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eRust resistant hardware that will outlast your vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"textTitle\"\u003eInstall\u003c\/h2\u003e\n\u003cdiv class=\"textDescription\"\u003eThe Unitronic Cold Air Intake System for vehicles equipped with the 1.8\/2.0 TSI Gen3 engine is designed to be simple to install with all the necessary hardware included. Installation time will take approximately one hour including the removal of the factory intake and installation of your new intake system.\u003cbr\u003e\u003cbr\u003eA difficulty rating of 1 means that minimal tools and experience are required and those with a basic understanding of the vehicle should have no problem completing the installation.\u003cbr\u003e\u003cbr\u003eUnitronic products are designed to meet all manufacturer tolerances and specification with regard to installation ease and tolerances. All of our products are developed to the highest standard of fitment and finish to ensure that it lasts the life of your vehicle.\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":49305883902254,"sku":"UH006-INA","price":415.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/intakeprototypeinstallmerged4logoupdatev2.jpg?v=1724727273"},{"product_id":"unitronic-dq250-mq350-dogbone-engine-mount-race","title":"Unitronic DQ250\/MQ350 Dogbone Engine Mount (Race)","description":"\u003ch2\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePRODUCT DESCRIPTION:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eUnitronic's all-new Dogbone Mount Upgrade was engineered to maximize performance through eliminating the slop present in the factory style mount and improving drivetrain stability to ensure the system is better suited to withstand the forces present during hard launches or demanding driving scenarios on the drag strip or race track.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis Dogbone Mount Upgrade virtually eliminates wheel hop and offers more crisp shifts, all while maintaining reduced NVH (noise\/vibration\/harshness) for comfortable operation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"textTitle\"\u003e\u003cstrong\u003eFeatures \/ Benefits\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eT7075 Billet Aluminum Arm and End Caps w\/ Black Anodized Finish\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUnique Nylon inserts\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLaser-Etched and Engraved Unitronic logos\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eYellow ″Race″ Polyurethane Bushings\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDirect Bolt-On Fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"textTitle\"\u003e\u003cstrong\u003eHardware Included\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eYellow ″Race″ Polyurethane Bushings\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eT7075 Billet Aluminum Arm and End Caps\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAll Necessary Hardware Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"textTitle\"\u003e\u003cstrong\u003eRecommended Software\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eStage 1\u003c\/li\u003e\n\u003cli\u003eStage 1+\u003c\/li\u003e\n\u003cli\u003eStage 2\u003c\/li\u003e\n\u003cli\u003eStage 2+\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":49402731004206,"sku":"UH009-DRA","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/unidogbone23yellowtitleweb.jpg?v=1726853748"},{"product_id":"unitronic-mpi-injector-upgrade-kit-for-2-5tfsi-evo-rs3-ttrs","title":"Unitronic MPI Injector Upgrade Kit for 2.5TFSI EVO RS3\/TTRS","description":"\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUp to +183 HP \/ +177 TQ over stock output w\/ Unitronic Stage 2 E85 Performance Software and required supporting modifications\u003c\/li\u003e\n\u003cli\u003eGenuine Bosch EV14 MPI Injector\u003c\/li\u003e\n\u003cli\u003eUnitronic Jetronic to Sumitomo Plug-and-Play Wiring Harness Adapter\u003c\/li\u003e\n\u003cli\u003eGasoline and E85 compatible\u003c\/li\u003e\n\u003cli\u003eEasy installation\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment\u003c\/li\u003e\n\u003cli\u003eOnly for use alongside Unitronic Stage 2 or Stage 3 ECU Performance Software for 2.5TFSI EA855 EVO\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cbr\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eHardware Included\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003e5x Unitronic Jetronic to Sumitomo Plug-and-Play Wiring Harness Adapters\u003c\/li\u003e\n\u003cli\u003e5x Genuine Bosch EV14 MPI Injectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cbr\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eRequired Software\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eMust install Stage 2 E85 file optimized to use with Unitronic MPI Upgrade Kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":49800359706926,"sku":"UH005-FLA","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/25tfsievofuelinjectorsandharnessesupgradebyunitronic10.jpg?v=1738774947"},{"product_id":"unitronic-uniflex-hardware-kit-w-sensor-for-2-0-tsi-evo4-and-2023-rs3","title":"Unitronic UNIFLEX Hardware Kit (w\/ Sensor) for 2.0 TSI EVO4 and 2023+ RS3","description":"\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eUnitronic’s UniFLEX Hardware Kit includes all components required to make flex fuel integration as effortless as possible. Comprised of our proprietary UniFLEX ethanol device, a genuine Continental ethanol content sensor with all required fittings and harnesses, this kit allows for true plug and play installation.\u003cbr\u003e\u003cbr\u003eUniFLEX is also Bluetooth® enabled, allowing for wireless connectivity with iOS and Android mobile devices using the Unitronic UniE85 Manager App.\u003cbr\u003e\u003cbr\u003eUnitronic E85 Manager is available for download on the\u003cspan\u003e \u003c\/span\u003e\u003cb\u003e\u003ca href=\"https:\/\/apps.apple.com\/us\/app\/unie85-manager\/id6450461419\"\u003eApp Store\u003c\/a\u003e\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003cb\u003e\u003ca href=\"https:\/\/play.google.com\/store\/apps\/details?id=com.unitronic.e85\"\u003eGoogle Play Store\u003c\/a\u003e\u003c\/b\u003e.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eWhile this kit works with all 2.0TSI EVO4 vehicles, only the MK8 GTI is currently supported with FLEX enabled ECU Software. MK8 Golf R and 8Y S3 FLEX enabled software support is coming very soon.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eIt is strongly recommended to use the UniFLEX Bracket for best experience.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE ON SOFTWARE:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eUnitronic FLEX Enabled ECU Software is required and\u003cspan\u003e \u003c\/span\u003e\u003cu\u003enot included.\u003c\/u\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cbr\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eCAN integration of ethanol content data streamed to the ECM\u003c\/li\u003e\n\u003cli\u003ePlug-n-play harness - No cutting, splicing or ECM re-pinning\u003c\/li\u003e\n\u003cli\u003eBluetooth® connectivity with UniE85 Manager iOS\/Android App\u003c\/li\u003e\n\u003cli\u003eView ethanol content \u0026amp; fuel temperature with UniE85 Manager\u003c\/li\u003e\n\u003cli\u003eCustomize sensor calibration offsets and CAN integrations\u003c\/li\u003e\n\u003cli\u003eObtain any desired fuel blend with the E85 mix calculator\u003c\/li\u003e\n\u003cli\u003eOTA updates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cbr\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eRequired Software\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnitronic Stage 1 FLEX enabled (full\/low TQ) Software\u003c\/li\u003e\n\u003cli\u003eUnitronic Stage 1+ FLEX enabled (full\/low TQ) Software\u003c\/li\u003e\n\u003cli\u003eUnitronic Stage 2 FLEX enabled (full\/low TQ) Software\u003c\/li\u003e\n\u003cli\u003eUnitronic Stage 3 FLEX enabled (full\/low TQ) Software for Garrett PowerMax Turbo (coming soon for the MK8 GTI)\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eAdditional fees apply for all FLEX enabled calibrations. Contact Unitronic or your preferred Authorized Dealer for more information.\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":49800363573550,"sku":"UH013-FLA","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/dsc010364cropevo4edit2web.jpg?v=1738775243"},{"product_id":"spark-plug-set-for-2-5tfsi-evo","title":"Spark Plug Set for 2.5TFSI EVO","description":"\u003ch2 class=\"textTitle\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eRecommended for 2.5TFSI EVO (DAZA) applications with a replacement interval of 10,000-15,000 miles (16,000-24,000 km). Gap to 0.024\" +\/- 0.002. Unitronic recommends a proper spark plug gap tool, like the STM Tuned Gap Tool.\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2 class=\"textTitle\"\u003eHardware Included\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003e5 x NGK R7437-9 Spark Plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":49800369275182,"sku":"UH003-ACA","price":219.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/uh003aca_ngkracingcompsparkplugset_unitronic6.jpg?v=1738775569"},{"product_id":"intercooler-upgrade-for-vw-audi-mk7-8v-8y-golf-gti-golf-r-a3-s3","title":"Intercooler Upgrade for VW\/Audi Mk7\/8V\/8Y Golf\/GTI\/Golf R\/A3\/S3","description":"\u003cp\u003e\u003cspan\u003eUnitronic's Intercooler Upgrade Kit for vehicles equipped with 1.8\/2.0 TSI Gen3 MQB engines, is a direct OEM replacement kit with the ability to support 600HP and more! Featuring a massive 23.5\" x 2\" x 16.5\" bar and plate intercooler core made from T5052 aluminum, T6061 cast aluminum end tanks, proprietary internal fin and louver configuration, and a TIG welded construction.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eUnitronic's Intercooler Upgrade Kit will resist heat-soak and provide optimal and efficient cooling in any driving conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e*Also fits the 8Y S3.\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003cdiv class=\"textTitle\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFeatures \/ Benefits\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eHighly efficient bar \u0026amp; plate intercooler core constructed of T5052 Aluminum\u003c\/li\u003e\n\u003cli\u003eDrastically reduces charge air temperature for cooler, more dense air\u003c\/li\u003e\n\u003cli\u003eSignificantly more resistant to heat-soak\u003c\/li\u003e\n\u003cli\u003eOver 60% more volume than OEM intercooler\u003c\/li\u003e\n\u003cli\u003eT6061 cast Aluminum end tanks\u003c\/li\u003e\n\u003cli\u003eWeight 24.4 lbs\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement; no bumper, radiator support, or other trimming required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003cdiv class=\"textTitle\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eHardware Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnitronic Direct Fit Intercooler Core for vehicles equipped with 1.8\/2.0 TSI Gen3 MQB engines and 8Y S3.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003cdiv class=\"textTitle\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eRecommended Software\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eStage 1\u003c\/li\u003e\n\u003cli\u003eStage 1+\u003c\/li\u003e\n\u003cli\u003eStage 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":49972598669614,"sku":"UH009-ICA","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/img_86024mqbv19intercoolerblackweb.jpg?v=1743641275"},{"product_id":"unitronic-k04-turbocharger-upgrade-kit-for-vw-audi-ea113","title":"Unitronic K04 Turbocharger Upgrade Kit for VW\/Audi EA113","description":"\u003ch3 class=\"textTitle\"\u003eDescription\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eUnitronic's K04 Turbocharger Upgrade Kit for the transverse 2.0L TFSI engine is the perfect combination of performance, reliability, and drivability.\u003cbr\u003e\u003cbr\u003eUtilizing the OEM Borg-Warner K04-0064 turbocharger from European Audi\/VW models, Unitronic's K04 kit is a comprehensive package including all necessary components to boost performance to an astounding 335HP\/335LB-FT TQ (+135HP\/+128LB-FT TQ) with meticulously calibrated Unitronic's Stage 2+ Performance Software (included). Deliver the power while maintaining your 2.0L TFSI's OEM appearance now!\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003ch3 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eComplete Upgrade Package, including Unitronic Stage 2+ Performance Software specially designed for this kit\u003c\/li\u003e\n\u003cli\u003eHigh Efficiency Diverter Valve Relocation Kit\u003c\/li\u003e\n\u003cli\u003eTig Welded Compressor Inlet Modification\u003c\/li\u003e\n\u003cli\u003e4-ply Silicone Hoses\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"textTitle\"\u003eHardware Included\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnitronic Stage 2+ Performance Software designed for Unitronic K04 Kit\u003c\/li\u003e\n\u003cli\u003eUnitronic OEM Borg Warner K04-0064 Turbocharger\u003c\/li\u003e\n\u003cli\u003eUnitronic Diverter Valve Relocation Silicone Reroute Hose\u003c\/li\u003e\n\u003cli\u003eUnitronic Compressor Outlet Silicone Hose\u003c\/li\u003e\n\u003cli\u003eUnitronic Compressor Inlet Silicone Hose with DV Reroute Port\u003c\/li\u003e\n\u003cli\u003eUnitronic CNC Aluminum Diverter Valve Relocation Adapter\u003c\/li\u003e\n\u003cli\u003eDV Mounting Screws (3x)\u003c\/li\u003e\n\u003cli\u003eUnitronic Throttle Body Pipe Silicone Coupler with DV Reroute Port\u003c\/li\u003e\n\u003cli\u003eUnitronic Hose Clips (2)\u003c\/li\u003e\n\u003cli\u003eDV Harness Extension\u003c\/li\u003e\n\u003cli\u003eBoost Cap for Throttle Body Pipe\u003c\/li\u003e\n\u003cli\u003eOEM Exhaust Manifold Gasket\u003c\/li\u003e\n\u003cli\u003eOEM Oil Return Flange Gasket\u003c\/li\u003e\n\u003cli\u003eOEM Oil Feed Line Crush Washers (2)\u003c\/li\u003e\n\u003cli\u003eOEM Coolant Feed Line Crush Washers (2x)\u003c\/li\u003e\n\u003cli\u003eOEM Coolant Return Line Crush Washers(2x)\u003c\/li\u003e\n\u003cli\u003eOEM Exhaust Manifold Nuts (9x)\u003c\/li\u003e\n\u003cli\u003eDownpipe Mounting Studs (4x)\u003c\/li\u003e\n\u003cli\u003eDownpipe Mounting Nuts (4x)\u003c\/li\u003e\n\u003cli\u003eHigh Grade European Style Hose Clamps (9x)\u003c\/li\u003e\n\u003cli\u003eLiqui Moly Pro-Line Turbo Additive\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"textTitle\"\u003eRequired Hardware\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnitronic 3'' Downpipe\u003c\/li\u003e\n\u003cli\u003eHigh Pressure Fuel Pump Upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"textTitle\"\u003eInstall\u003c\/h3\u003e\n\u003cdiv class=\"textDescription\"\u003eFits Transverse 2.0 TFSI engines. Unitronic's K04 kit is very straight forward to install. Consisting of many OEM and precisely engineered Unitronic components using the latest in 3D modeling technology, to ensure perfect fitment and maximum performance.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":50611304137006,"sku":"UH002-BTA","price":2999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/tfsi_k04_kit_7b2021liqui3web.jpg?v=1750909558"},{"product_id":"unitronic-intercooler-upgrade-kit-for-vw-audi-ea113","title":"Unitronic Intercooler Upgrade Kit for VW\/Audi EA113","description":"\u003ch3 class=\"textTitle\"\u003eDescription\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eUnitronic's Intercooler Upgrade Kit for the 2.0 TFSI is a direct OEM replacement kit with the ability to support 600HP and more! Featuring a massive 23.5\" x 2\" x 16.5\" bar and plate intercooler core made from T5052 aluminum, T6061 cast aluminum end tanks, proprietary internal fin and louver configuration, and a TIG welded construction.\u003cbr\u003e\u003cbr\u003eUnitronic's Intercooler Upgrade Kit will resist heat-soak and provide optimal and efficient cooling in any driving conditions. This upgrade is perfect for any project, from stock turbo Stage 2 applications to all-out 500+HP Big Turbo upgrades on the TFSI.\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003ch3 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eHighly efficient bar \u0026amp; plate intercooler core constructed of T5052 Aluminum\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces charge air temperature for maximum performance\u003c\/li\u003e\n\u003cli\u003eDrastically more resistant to heat-soak\u003c\/li\u003e\n\u003cli\u003eOver 60% more volume than factory intercooler\u003c\/li\u003e\n\u003cli\u003eT6061 cast Aluminum end tank design\u003c\/li\u003e\n\u003cli\u003eSufficient spacing between A\/C condenser and radiator\u003c\/li\u003e\n\u003cli\u003eCNC machined billet Aluminum OEM boost hose adapter\u003c\/li\u003e\n\u003cli\u003eMulti-ply flow-matched silicone hoses\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement; No bumper, radiator support, or other trimming required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"textTitle\"\u003eHardware Included\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnitronic Direct Fit 2.0 TFSI Intercooler Core\u003c\/li\u003e\n\u003cli\u003eUnitronic 2.0 TFSI Hose Kit\u003c\/li\u003e\n\u003cli\u003eUnitronic MK5\/MK6 Intercooler Bolt Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"textTitle\"\u003eRecommended Software\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eStage 1\u003c\/li\u003e\n\u003cli\u003eStage 1+\u003c\/li\u003e\n\u003cli\u003eStage 2 (If equipped with Unitronic's 3'' Downpipe)\u003c\/li\u003e\n\u003cli\u003eStage 2+ (If equipped with Unitronic's K04 kit and 3'' Downpipe)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":50611345850670,"sku":"UH007-ICA","price":659.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/18tsi_intercooler2_818bb589-afde-4e3d-8550-128aff1311ad.jpg?v=1750909930"},{"product_id":"unitronic-intercooler-for-audi-8v-rs3-8s-ttrs","title":"Unitronic Intercooler for Audi 8V RS3 \u0026 8S TTRS","description":"\u003ch2 class=\"textTitle\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eSpecifically designed to fit vehicles equipped with 2.5TFSI EA855 EVO engines, this Unitronic Intercooler Upgrade Kit is a direct OEM replacement featuring an over-sized 24” x 10.2” x 3.54” bar and plate intercooler made from a cast aluminum core and end tanks, proprietary internal fin and louver configuration, and a TIG welded construction.\u003cbr\u003e\u003cbr\u003eUnitronic's 2.5TFSI Intercooler Upgrade comes in a black finish and will resist heat-soak and provide efficient cooling in any driving condition.\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eHighly efficient bar \u0026amp; plate intercooler core\u003c\/li\u003e\n\u003cli\u003eDrastically reduces charge air temperature for cooler, more dense air\u003c\/li\u003e\n\u003cli\u003eSignificantly more resistant to heat-soak\u003c\/li\u003e\n\u003cli\u003e71% more volume than OEM (Unitronic Core Dimensions: 24” x 10.25” x 3.5” \/ 610mm x 260mm x 90mm)\u003c\/li\u003e\n\u003cli\u003eCast Aluminum end tanks\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement; no bumper, radiator support, or other trimming required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cbr\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eHardware Included\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnitronic Direct Fit Intercooler Core for vehicles equipped with 2.5TFSI EVO engines.\u003c\/li\u003e\n\u003cli\u003eAll Necessary Hardware Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlock\"\u003e\n\u003cbr\u003e\n\u003cdiv class=\"subBlockTextWrapper\"\u003e\n\u003ch2 class=\"textTitle\"\u003eRecommended Software\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eStage 1\u003c\/li\u003e\n\u003cli\u003eStage 1+\u003c\/li\u003e\n\u003cli\u003eStage 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Unitronic","offers":[{"title":"Yes \/ 2018-2021 (UH010-IC0)","offer_id":51704523424046,"sku":"UH012-ICA-1","price":1043.98,"currency_code":"USD","in_stock":true},{"title":"No","offer_id":51704523456814,"sku":"UH012-ICA-2","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/img_15063ttrsrs3blackintercoolerweb.jpg?v=1763059600"},{"product_id":"unitronic-downpipe-with-midpipes-for-audi-8v-rs3-8s-ttrs-2-5tfsi-evo","title":"Unitronic Downpipe with Midpipes for Audi 8V RS3 \u0026 8S TTRS - 2.5TFSI EVO","description":"\u003ch2 class=\"textTitle\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eThe Unitronic High-Flow Performance Downpipe for 2.5TFSI EVO (DAZA) engines is a direct bolt-on upgrade, designed specifically to eliminate unwanted restrictions in the factory unit and increase power with the help of Unitronic Stage 2 Software. It also helps reduce turbo lag and enhance the exhaust note, while utilizing a GESi 5” G-Sport Ultra High Output UHO+ 400cpsi Catalytic Converter which is engineered to meet or exceed emissions standards.\u003cbr\u003e\u003cbr\u003eThe Unitronic High-Flow Performance Downpipe comes bundled with Unitronic Midpipes to further eliminate restrictions and when combined with Unitronic Stage 2 Performance Software, yields output of up to 621HP\/564LB-FT with E85 and other supporting hardware modifications.\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003ch2 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eCast Stainless Steel pre-cat downturn and post-cat transition\u003c\/li\u003e\n\u003cli\u003eDual 70mm T304 Stainless Steel tubing\u003c\/li\u003e\n\u003cli\u003eTIG-welded construction\u003c\/li\u003e\n\u003cli\u003eGESi 5” G-Sport Ultra High Output UHO+ 400cpsi Catalytic Converter\u003c\/li\u003e\n\u003cli\u003eFactory catalyst placement for maximum efficiency\u003c\/li\u003e\n\u003cli\u003eOEM-style corrugated mesh flex bellows\u003c\/li\u003e\n\u003cli\u003eProper factory Oxygen Sensor placement maintained\u003c\/li\u003e\n\u003cli\u003eOE exhaust hanger mounting provisions\u003c\/li\u003e\n\u003cli\u003eOE Prop-shaft heat shield bracket\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment\u003c\/li\u003e\n\u003cli\u003eCompatible with factory cat-back exhaust system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"textTitle\"\u003eHardware Included\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnitronic High-Flow direct fit Downpipe for vehicles equipped with 2.5 TFSI EVO engines.\u003c\/li\u003e\n\u003cli\u003eDriver and passenger side midpipes.\u003c\/li\u003e\n\u003cli\u003eAll required hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"textTitle\"\u003eRecommended Software\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eStage 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"textTitle\"\u003eUnbeatable Design and Construction\u003c\/h2\u003e\n\u003cdiv class=\"testingDataImageWrapper\"\u003e\u003cimg class=\"modalImage\" src=\"https:\/\/www.getunitronic.com\/hardware\/images\/UH033-EXA\/unbeatabledesignandconstruction\/img_093652021uni25tfsievodownpipeweb.jpg\" alt=\"img_093652021uni25tfsievodownpipeweb.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eAs with the original unit, Unitronic utilized the 1-to-2 split downpipe design. Following Audi’s modeling, Unitronic developed a large high-flow cast stainless steel downturn, increasing cross-sectional area, effectively improving flow and decreasing back pressure. Part of the design criteria was to maintain un-biased flow between the runners. Flow through the large catalytic converter aids with flow distribution; and as a result, pressure and exhaust velocity are balanced to maintain efficiency and the distinct sound of the turbocharged 5-cylinder engine. The post-cat cast stainless steel transition continues, allowing for a smooth transition and flow distribution into dual 70mm T304 stainless steel tubing with OEM-style corrugated mesh flex bellows.\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003ch2 class=\"textTitle\"\u003eMeets or Exceeds Emissions Standards\u003c\/h2\u003e\n\u003cdiv class=\"testingDataImageWrapper\"\u003e\u003cimg class=\"modalImage\" src=\"https:\/\/www.getunitronic.com\/hardware\/images\/UH033-EXA\/meetsorexceedsemissionsstandards\/img_16602uni25tfsievodownpipeweb.jpg\" alt=\"img_16602uni25tfsievodownpipeweb.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eUnitronic Engineers thoroughly validated designs to ensure the Downpipe yields the results intended with several functional prototypes created. While working together with GESi, Unitronic tested several iterations of their G-Sport Emissions Systems Catalytic Converters to ensure the product meets or exceeds emissions standards and finally chose the GESi 5” G-Sport Ultra High Output UHO+ 400cpsi Catalytic Converter which is rated at up to 1000HP by GESi.\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003ch2 class=\"textTitle\"\u003eInstall\u003c\/h2\u003e\n\u003cdiv class=\"textDescription\"\u003eThe Unitronic 2.5TFSI Downpipe and Midpipes are direct OEM replacements. Using 3D modeling technology, Unitronic's Downpipe and Midpipes are direct bolt-on upgrades that can be installed within a matter of hours with moderate mechanical knowledge and tools.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":51275990532398,"sku":"UH033-EXA","price":2269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/img_0961420212uni25tfsievodownpipeweb.jpg?v=1763159157"},{"product_id":"unitronic-downpipe-for-audi-8v-rs3-8s-ttrs","title":"Unitronic Downpipe for Audi 8V RS3 \u0026 8S TTRS","description":"\u003ch2 class=\"textTitle\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eThe Unitronic High-Flow Performance Downpipe for 2.5TFSI EVO (DAZA) engines is a direct bolt-on upgrade, designed specifically to eliminate unwanted restrictions in the factory unit and increase power with the help of Unitronic Stage 2 Software. It also helps reduce turbo lag and enhance the exhaust note, while utilizing a GESi 5” G-Sport Ultra High Output UHO+ 400cpsi Catalytic Converter which is engineered to meet or exceed emissions standards.\u003cbr\u003e\u003cbr\u003eWhen combined with Unitronic Stage 2 Performance Software, total output is raised to 621HP\/564LB-FT with E85 and other supporting hardware modifications.\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003ch2 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eCast Stainless Steel pre-cat downturn and post-cat transition\u003c\/li\u003e\n\u003cli\u003eDual 70mm T304 Stainless Steel tubing\u003c\/li\u003e\n\u003cli\u003eTIG-welded construction\u003c\/li\u003e\n\u003cli\u003eGESi 5” G-Sport Ultra High Output UHO+ 400cpsi Catalytic Converter\u003c\/li\u003e\n\u003cli\u003eFactory catalyst placement for maximum efficiency\u003c\/li\u003e\n\u003cli\u003eOEM-style corrugated mesh flex bellows\u003c\/li\u003e\n\u003cli\u003eProper factory Oxygen Sensor placement maintained\u003c\/li\u003e\n\u003cli\u003eOE exhaust hanger mounting provisions\u003c\/li\u003e\n\u003cli\u003eOE Prop-shaft heat shield bracket\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment\u003c\/li\u003e\n\u003cli\u003eCompatible with factory cat-back exhaust system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"textTitle\"\u003eHardware Included\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnitronic High-Flow direct fit Downpipe for vehicles equipped with 2.5 TFSI EVO engines.\u003c\/li\u003e\n\u003cli\u003eAll required hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"textTitle\"\u003eRecommended Software\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eStage 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"textTitle\"\u003eUnbeatable Design and Construction\u003c\/h2\u003e\n\u003cdiv class=\"testingDataImageWrapper\"\u003e\u003cimg class=\"modalImage\" src=\"https:\/\/www.getunitronic.com\/hardware\/images\/UH051-EXA\/unbeatabledesignandconstruction\/img_093652021uni25tfsievodownpipeweb.jpg\" alt=\"img_093652021uni25tfsievodownpipeweb.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eAs with the original unit, Unitronic utilized the 1-to-2 split downpipe design. Following Audi’s modeling, Unitronic developed a large high-flow cast stainless steel downturn, increasing cross-sectional area, effectively improving flow and decreasing back pressure. Part of the design criteria was to maintain un-biased flow between the runners. Flow through the large catalytic converter aids with flow distribution; and as a result, pressure and exhaust velocity are balanced to maintain efficiency and the distinct sound of the turbocharged 5-cylinder engine. The post-cat cast stainless steel transition continues, allowing for a smooth transition and flow distribution into dual 70mm T304 stainless steel tubing with OEM-style corrugated mesh flex bellows.\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003ch2 class=\"textTitle\"\u003eMeets or Exceeds Emissions Standards\u003c\/h2\u003e\n\u003cdiv class=\"testingDataImageWrapper\"\u003e\u003cimg class=\"modalImage\" src=\"https:\/\/www.getunitronic.com\/hardware\/images\/UH051-EXA\/meetsorexceedsemissionsstandards\/img_16602uni25tfsievodownpipeweb.jpg\" alt=\"img_16602uni25tfsievodownpipeweb.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eUnitronic Engineers thoroughly validated designs to ensure the Downpipe yields the results intended with several functional prototypes created. While working together with GESi, Unitronic tested several iterations of their G-Sport Emissions Systems Catalytic Converters to ensure the product meets or exceeds emissions standards and finally chose the GESi 5” G-Sport Ultra High Output UHO+ 400cpsi Catalytic Converter which is rated at up to 1000HP by GESi.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":51276001444142,"sku":"UH051-EXA","price":1979.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/img_0926420212uni25tfsievodownpipeweb_59143cc6-3b80-46ab-a031-7f13d3c92c55.jpg?v=1763159533"},{"product_id":"unitronic-4-intake-inlet-elbow-for-audi-8y-rs3","title":"Unitronic 4\" Intake Inlet Elbow for Audi 8Y RS3","description":"\u003ch2 class=\"textTitle\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eUnitronic is proud to offer its highly anticipated 4-inch Turbo Inlet Elbow for the 8Y RS3 equipped with the 2.5TFSI EVO (DXH) engine.\u003cbr\u003e\u003cbr\u003eDrawing from extensive experience in previous 2.5TFSI EVO applications, Unitronic Mechanical Engineers took the time to design this unit specific for the DXH equipped 8Y RS3, retaining functionality with all OEM PCV system components.\u003cbr\u003e\u003cbr\u003eFeaturing high-quality cast Aluminum construction and premium supporting hardware, this 4-inch Turbo Inlet Elbow easily supports the airflow demands of the factory turbo as well as all of the mainstream hybrid turbos currently on the market, thanks to Unitronic’s clever adapter rings.\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003ch2 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003e28% increase in flow over stock\u003c\/li\u003e\n\u003cli\u003eProven power, torque, and airflow gains\u003c\/li\u003e\n\u003cli\u003eModular CNC-machined billet Aluminum compressor inlet adapter rings\u003c\/li\u003e\n\u003cli\u003eOEM PCV functionality for adequate crankcase ventilation\u003c\/li\u003e\n\u003cli\u003eAircraft grade cast Aluminum construction\u003c\/li\u003e\n\u003cli\u003eCNC-machined mounting flanges, inlet and outlets\u003c\/li\u003e\n\u003cli\u003eSmooth airflow transitions\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment. (Does not work with stock intake.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"textTitle\"\u003eHardware Included\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnitronic 4\" Turbo Inlet Elbow for 8Y RS3\u003c\/li\u003e\n\u003cli\u003e1 x Unitronic Adapter Ring (select from drop down list)\u003c\/li\u003e\n\u003cli\u003eSilicone Jet Pump Connection Line\u003c\/li\u003e\n\u003cli\u003eWastegate Silicone Vacuum Line\u003c\/li\u003e\n\u003cli\u003eAll Necessary Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":51283448135982,"sku":"UH060-INA","price":488.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/dsc0020628yrs34inchturboinletelbowv253wglinebarbfittingweb.jpg?v=1763390566"},{"product_id":"unitronic-mpi-fuel-rail-upgrade-kit-for-vw-mk7-gti-gli-audi-8v-a3-s3-ea888-3","title":"Unitronic MPI Fuel Rail Upgrade Kit for VW Mk7 GTI\/GLI \u0026 Audi 8V A3\/S3 EA888.3","description":"\u003ch2 class=\"textTitle\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eThis complete MPI Upgrade Kit allows you to add port side fuel injectors to the factory MQB EA888.3 North American intake manifolds and features uncompromised, top shelf components which were carefully designed, manufactured and assembled by Unitronic.\u003cbr\u003e\u003cbr\u003eGet the absolute most out of your big turbo MK7 Golf, GTI, GLI, Golf R or 8V A3 and S3 on the road or at the track with the Unitronic MPI Upgrade Kit!\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003ch2 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eMost Complete Plug and Play MPI Upgrade Kit On the Market\u003c\/li\u003e\n\u003cli\u003eUnitronic CNC-Machined Billet Aluminum Fuel Rail\u003c\/li\u003e\n\u003cli\u003eGenuine Bosch Motorsport 980CC Fuel Injectors\u003c\/li\u003e\n\u003cli\u003eGenuine Bosch Motorsport Fuel Pressure Sensor\u003c\/li\u003e\n\u003cli\u003eGenuine Continental Ethanol Content Sensor (optional)\u003c\/li\u003e\n\u003cli\u003ePremium Fuel Lines, Pinch Clamps and Hardware\u003c\/li\u003e\n\u003cli\u003ePlug and Play Wiring Harness for Simple Installation\u003c\/li\u003e\n\u003cli\u003ePrecision Drill Bit and Guide for OEM Intake Manifold Preparation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"textTitle\"\u003eRequired Software\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eMPI specific tuning not currently available from Unitronic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":51293170729262,"sku":"UH009-FLA","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/img_34955mk8mqb2web.jpg?v=1763602130"},{"product_id":"unitronic-mpi-fuel-rail-kit-w-o-injectors-for-vw-audi-ea888-gen-3-a3-s3-gti-golf-r","title":"Unitronic MPI Fuel Rail Kit w\/o Injectors for VW\/Audi EA888 Gen 3 (A3\/S3\/GTI\/Golf R)","description":"\u003ch2 class=\"textTitle\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eThis MPI Upgrade Kit allows you to add port side fuel injection (injectors not included) to the factory MQB EA888.3 North American intake manifolds and features uncompromised, top shelf components which were carefully designed, manufactured and assembled by Unitronic.\u003cbr\u003e\u003cbr\u003eGet the absolute most out of your big turbo MK7 Golf, GTI, GLI, Golf R or 8V A3 and S3 on the road or at the track with the Unitronic MPI Upgrade Kit!\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003ch2 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eMost Complete Plug and Play MPI Upgrade Kit On the Market\u003c\/li\u003e\n\u003cli\u003eUnitronic CNC-Machined Billet Aluminum Fuel Rail\u003c\/li\u003e\n\u003cli\u003eGenuine Bosch Motorsport Fuel Pressure Sensor\u003c\/li\u003e\n\u003cli\u003eGenuine Continental Ethanol Content Sensor (optional)\u003c\/li\u003e\n\u003cli\u003ePremium Fuel Lines, Pinch Clamps and Hardware\u003c\/li\u003e\n\u003cli\u003ePlug and Play Wiring Harness for Simple Installation\u003c\/li\u003e\n\u003cli\u003ePrecision Drill Bit and Guide for OEM Intake Manifold Preparation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":51361976451374,"sku":"UH018-FLA","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/mk8mqbmpiupgradehighlightsnoinjectorweb1.jpg?v=1764732685"},{"product_id":"unitronic-4-inch-forged-carbon-fiber-intake-system-for-2-5-tfsi-evo-8v-8y-rs3-ttrs","title":"Unitronic 4 Inch Forged Carbon Fiber Intake System for 2.5 TFSI EVO - 8V 8Y RS3 \/ TTRS","description":"\u003ch3 class=\"textTitle\"\u003eDescription\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eComprised of a forged carbon fiber airbox, airduct, transition tube and intake tube with unique couplers, this stunning new intake system features a distinctive marbled finish which combines to unleash the full potential of your 2.5TFSI® EVO 8V.2 RS 3® or 8S TT RS®.\u003cbr\u003e\u003cbr\u003eBuilt with reinforced materials, high quality EPDM couplers and stainless steel hardware, this Forged Carbon Fiber Intake System is more than capable of standing up to the rigors of track use or daily driving while offering improved performance, airflow, throttle response and intoxicating turbo induction sounds.\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003ch3 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eUp to 88% increase in flow over stock\u003c\/li\u003e\n\u003cli\u003ePrepreg forged carbon fiber material\u003c\/li\u003e\n\u003cli\u003eAutoclave construction with proprietary molds\u003c\/li\u003e\n\u003cli\u003eBuilt-in UV and heat resistant finish for improved durability\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment with OEM mounting locations \u0026amp; EPDM mounting grommets\u003c\/li\u003e\n\u003cli\u003eHigh-quality stainless steel hose clamps\u003c\/li\u003e\n\u003cli\u003eEPDM couplers\u003c\/li\u003e\n\u003cli\u003eSmooth airflow transitions\u003c\/li\u003e\n\u003cli\u003eProven power, torque and airflow gains\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"textTitle\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3 class=\"textTitle\"\u003eHardware Included\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eForged Carbon Fiber Airbox\u003c\/li\u003e\n\u003cli\u003eForged Carbon Fiber Airduct\u003c\/li\u003e\n\u003cli\u003e4\" Forged Carbon Fiber Intake Tube\u003c\/li\u003e\n\u003cli\u003eForged Carbon Fiber Transition Tube\u003c\/li\u003e\n\u003cli\u003e4\" EPDM Inlet Coupler\u003c\/li\u003e\n\u003cli\u003e4\" EPDM Flex Coupler\u003c\/li\u003e\n\u003cli\u003e6\" Tapered Cone Air Filter\u003c\/li\u003e\n\u003cli\u003eEPDM Mounting Grommets\u003c\/li\u003e\n\u003cli\u003eAll Necessary Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Unitronic","offers":[{"title":"8V (2017-2018)","offer_id":51702523494702,"sku":"UH050-INA-1","price":2299.99,"currency_code":"USD","in_stock":true},{"title":"8V.5 (2019-2020)","offer_id":51702523527470,"sku":"UH050-INA-2","price":2299.99,"currency_code":"USD","in_stock":true},{"title":"8Y (2021-2024)","offer_id":51702523560238,"sku":"UH050-INA-3","price":2409.98,"currency_code":"USD","in_stock":true},{"title":"8Y.5 (2025+)","offer_id":51702523593006,"sku":"UH050-INA-4","price":2409.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/dsc078414uni25tfsievoforgedcfintakeweb.jpg?v=1770085716"},{"product_id":"unitronic-midpipes-for-audi-8y-8y-5-rs3-8s-ttrs","title":"Unitronic Midpipes for Audi 8Y\/8Y.5 RS3 \u0026 8S TTRS","description":"\u003ch3 class=\"textTitle\"\u003eDescription\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eMade from T304 stainless steel tubing and featuring T316 stainless steel flanges, these midpipes are direct replacement units to your factory secondary pipes. Give your 8V.2 \/ 8Y \/ 8Y.2 RS3 or 8S TTRS a more sporty growl by eliminating the resonators on the factory midpipes!\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003ch3 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eT304 Stainless Steel Tubing:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eQuality material that will outlast the life of your vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eT316 Stainless Steel Flanges:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eQuality material that will outlast the life of your vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eDirect bolt-on fitment:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eGaskets and hardware included for easy installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"textTitle\"\u003eHardware Included\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eDriver and Passenger Side Midpipes\u003c\/li\u003e\n\u003cli\u003e2 x Exhaust Gaskets\u003c\/li\u003e\n\u003cli\u003e6 x M8x1.25 x 30mm Hex Head Screws\u003c\/li\u003e\n\u003cli\u003e6 x M8 Washers\u003c\/li\u003e\n\u003cli\u003e6 x Copper Flange Lock Nut (OEM Style)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"textTitle\"\u003eInstall\u003c\/h3\u003e\n\u003cdiv class=\"textDescription\"\u003eReplacing your factory secondary pipes is made easy with Unitronic Midpipes as we include new bolts, nuts, washers and gaskets with each kit.\n\u003cdiv class=\"installDifWrapper\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":51704585290030,"sku":"UH034-EXA","price":395.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/25tfsimidpipesbyunitronic6.jpg?v=1770148078"},{"product_id":"unitronic-carbon-intake-system-for-audi-c8-rs6-rs7","title":"Unitronic Carbon Intake System for Audi C8 RS6\/RS7","description":"\u003ch3 class=\"textTitle\"\u003eDescription\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eUnitronic is proud to release its Carbon Fiber Intake System and Turbo Inlets for the C8 RS 6 and RS 7 equipped with the 4.0TFSI EA825 engine. This complete Intake System delivers massive gains of up to 58HP \/ 54LB-FT (Stage 2 93oct) made possible by optimizing airflow and alleviating pre-compressor restrictions with the factory system, netting up to 99.8% more flow than stock.\u003cbr\u003e\u003cbr\u003eWith five different finishes to choose from including; Gloss Carbon, Matte Carbon, Forged Carbon, Red Carbon Kevlar and Blue Carbon Kevlar, combined together with modular adapter rings on the Turbo Inlets to allow for fitments with both the stock and hybrid turbos, this Intake System allows you to personalize your engine bay with a premium look to match its superior performance.\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003cb\u003eFor 2023 RS 6 \/ RS 7, please add the\u003cspan\u003e \u003c\/span\u003e\u003cu\u003ePCV Adapter Kit for 2023 C8 4.0TT\u003c\/u\u003e\u003cspan\u003e \u003c\/span\u003eto your order.\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003ch3 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eOptimized Design for Maximum Performance:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eUnitronic specifically developed its air intake system to provide increased power, air velocity and throttle response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eProven Airflow and Power Gains:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eUp to 99.8% more flow than stock and +58hp\/+55lb-ft tq dyno gains (measured with Unitronic Stage 2 93 AKI tuned vehicle).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003ePersonalize your Engine Bay:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003e5 carbon fiber finishes to choose from including Gloss, Matte, Forged, Red Kevlar, and Blue Kevlar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003e2\/2 Twill Prepreg Carbon Fiber Weave:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eHigh quality material to give you a lightweight, durable and resistant airbox. (for Gloss, Matte, and Carbon Kevlar options)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eAutoclave Construction:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eThe curing process is completed in an autoclave to eliminate resin voids thus ensuring a strong component. A UV and heat resistant clear coat is then added on top of the carbon fiber to protect it against discoloration and give it a nice, smooth surface finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eOversized Turbo Inlets:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eMassive 74mm CNC-machined Billet Aluminum Turbo Inlets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eModular Adapter Rings:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eModular adapter rings available for stock (54mm) and TheTurboEngineers TTE1020 (60mm) turbochargers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eProprietary Air Filter:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eHigh-flow pleated dry cotton panel filter with a massive 400 sq. in. surface area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eQuality Ribbed EPDM Couplers:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eHeavy duty, heat resistant, flexible and durable EPDM couplers will not crack or tear over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eStainless Steel Hardware:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eRust resistant hardware that will outlast your vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eDirect Bolt-On Fitment:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eUtilizes all OEM mounting locations for simple installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"textTitle\"\u003eHardware Included\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Fiber Air Box\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Cowl\u003c\/li\u003e\n\u003cli\u003e74mm CNC-machined Billet Aluminum Turbo Inlets\u003c\/li\u003e\n\u003cli\u003eModular CNC-machined Billet Aluminum Adapter Rings\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Winglets\u003c\/li\u003e\n\u003cli\u003eRibbed EPDM Couplers\u003c\/li\u003e\n\u003cli\u003eHigh-Flow Pleated Dry Cotton Air Filter\u003c\/li\u003e\n\u003cli\u003eStainless Steel Clamps\u003c\/li\u003e\n\u003cli\u003eHardware Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"textTitle\"\u003eRecommended Software\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eStage 1\u003c\/li\u003e\n\u003cli\u003eStage 1+\u003c\/li\u003e\n\u003cli\u003eStage 2\u003c\/li\u003e\n\u003cli\u003eStage 3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Unitronic","offers":[{"title":"--- Make a Selection --- \/ --- Make a Selection ---","offer_id":51848217559342,"sku":"UH034-INA-1","price":4589.99,"currency_code":"USD","in_stock":true},{"title":"--- Make a Selection --- \/ Yes (UH040-IN0)","offer_id":51848217592110,"sku":"UH034-INA-2","price":4679.99,"currency_code":"USD","in_stock":true},{"title":"--- Make a Selection --- \/ No","offer_id":51848217624878,"sku":"UH034-INA-3","price":4589.99,"currency_code":"USD","in_stock":true},{"title":"54mm Adapter Rings (OEM Turbos) \/ --- Make a Selection ---","offer_id":51848217657646,"sku":"UH034-INA-4","price":4589.99,"currency_code":"USD","in_stock":true},{"title":"54mm Adapter Rings (OEM Turbos) \/ Yes (UH040-IN0)","offer_id":51848217690414,"sku":"UH034-INA-5","price":4679.99,"currency_code":"USD","in_stock":true},{"title":"54mm Adapter Rings (OEM Turbos) \/ No","offer_id":51848217723182,"sku":"UH034-INA-6","price":4589.99,"currency_code":"USD","in_stock":true},{"title":"60mm Adapter Rings (TTE1050 Turbos) \/ --- Make a Selection ---","offer_id":51848217755950,"sku":"UH034-INA-7","price":4589.99,"currency_code":"USD","in_stock":true},{"title":"60mm Adapter Rings (TTE1050 Turbos) \/ Yes (UH040-IN0)","offer_id":51848217788718,"sku":"UH034-INA-8","price":4679.99,"currency_code":"USD","in_stock":true},{"title":"60mm Adapter Rings (TTE1050 Turbos) \/ No","offer_id":51848217821486,"sku":"UH034-INA-9","price":4589.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/c840tfsirs67intakebluetitleweb.jpg?v=1773523354"},{"product_id":"unitronic-dq381-2-unlocked-tcu-for-vw-mk8","title":"Unitronic DQ381.2 Unlocked TCU for VW Mk8","description":"\u003ch3 class=\"textTitle\"\u003eDescription\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eUnitronic is pleased to offer a solution, allowing vehicles which came with locked \"401\" TCUs to be tuned by swapping to our genuine Bosch DQ381.2 Unlocked TCU. These units completely replace your existing TCU and are expertly prepared making them ready to plug-n-play into your gearbox.\u003cbr\u003e\u003cbr\u003eInstallation is straight-forward—with the proper tools, equipment, and install guide, and Unitronic has made it even more simple with its optional Install Kit, equipping you with all the service items and hardware you may need, especially if you're due for a gearbox service.\u003cbr\u003e\u003cbr\u003eIf you're interested in taking advantage of this upgrade, a Unitronic TCU Tune is required.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(0, 170, 255);\"\u003eNOTE: Enter your VIN, TCU ID, and TCU Revision to ensure the unit can be properly configured for your specific vehicle. You can obtain this information through VCDS, ODIS or OBD11 and performing a full scan.\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003ch3 class=\"textTitle\"\u003eFeatures \/ Benefits\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Bosch DQ381.2 TCU\u003c\/li\u003e\n\u003cli\u003ePlug-n-Play installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"textTitle\"\u003eRecommended Software\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003eStage 1\u003c\/li\u003e\n\u003cli\u003eStage 1+\u003c\/li\u003e\n\u003cli\u003eStage 2\u003c\/li\u003e\n\u003cli\u003eStage 3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTOOLS NEEDED:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6mm, 8mm, and 14mm Allen Hex Bit\u003c\/li\u003e\n\u003cli\u003e7mm Socket\u003c\/li\u003e\n\u003cli\u003e10mm socket\u003c\/li\u003e\n\u003cli\u003e0-100nm Torque Wrench\u003c\/li\u003e\n\u003cli\u003eT20, T25, and T30 Torx bit\u003c\/li\u003e\n\u003cli\u003eOil Catch Pan\u003c\/li\u003e\n\u003cli\u003eVCDS (VagCom), ODIS (Factory Tool), or Equivalent scan tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":51868332622126,"sku":"UH002-DR2","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/dsc094552blxxx301tcuphotosweb.jpg?v=1774391804"},{"product_id":"unitronic-performance-tuning-suite-for-vw-mk8-golf-r-audi-8y-s3","title":"Unitronic Performance Tuning Suite for VW Mk8 Golf R \u0026 Audi 8Y S3","description":"\u003ch2 class=\"textTitle\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eUnitronic Stage 1+ Performance Software is precisely calibrated for use with 93 oct\/98 ron fuel and provides huge power gains over stock while maintaining an OEM-like driving experience with exceptional reliability.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eUnitronic Stage 1 TCU Performance Software and Unitronic Intercooler are required to achieve advertised power figures.\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCalibrations engineered to maximize clutch life in vehicles equipped with MQ350 transmissions are also available to help you enjoy increased performance while minimizing clutch wear.\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePerformance Software for your ECU Box Code is subject to availability.\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/www.getunitronic.com\/media\/images\/gallery\/swpage\/UniFLex-Logo-checkmark-2023-Black-red.png\" alt=\"UniFLEX\" title=\"UniFLEX\" width=\"349\" height=\"40\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/div\u003e\nUnitronic FLEX fuel enabled ECU Performance Software Calibrations are available for this platform allowing for seamless transitions between 100% gasoline to 85% ethanol and anything in between, without requiring an ECU reflash. Numerous UniFLEX calibrations are available depending on your transmission situation and fueling upgrades. UniFLEX calibrations also include several new features such as Rolling Launch Control (RLC) and Advanced Thermal Management. Learn more\u003cspan\u003e \u003c\/span\u003ehere.\u003cb\u003e\u003cbr\u003e\u003cbr\u003eFLEX enabled Software is available for an additional fee and it covers all lower stages up until your highest purchased stage as well.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eUniFLEX Hardware\u003cspan\u003e \u003c\/span\u003eis required in order to take advantage of these FLEX enabled calibrations. Please contact Unitronic or your local Authorized Dealer to learn more.\u003cbr\u003e\u003cbr\u003e\n\u003cdiv\u003e\u003cb\u003eFLEX ADD-ON PRICE: $400*\u003c\/b\u003e\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/www.getunitronic.com\/media\/images\/blog\/uaf-release\/FeatureBox-Logo-checkmark-2025-black-red-1-.png\" alt=\"FeatureBox\" title=\"FeatureBox\" width=\"364\" height=\"30\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/div\u003e\nThis platform is supported by Unitronic’s\u003cspan\u003e \u003c\/span\u003eFeatureBox\u003cspan\u003e \u003c\/span\u003eand Advanced Feature suite, giving users access to a wide range of new features and unmatched control over their vehicles. \u003cbr\u003e\u003cbr\u003e\n\u003cdiv\u003e\u003cb\u003eUAF SOFTWARE ADD-ON PRICE: $250*\u003c\/b\u003e\u003c\/div\u003e\n\u003cbr\u003e*Add-On Software pricing may vary for different regions.\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003ch3 class=\"textTitle\"\u003eFeatures\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eOptimized Responsiveness, Smoothness, Drivability, and Comfort\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eUnitronic’s ECU calibrations are engineered to improve engine response and reduce low-end lag. Unitronic’s Performance Software has gained worldwide recognition and is well known for its broad powerband, with smooth power delivery, maximizing responsiveness and “area under the curve”, under normal and hard acceleration.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eIgnition Timing Precisely Calibrated for Higher Octane Fuel\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eEngine calibration optimized to take advantage of higher fuel quality to extract maximum energy from the combustion. Therefore, when using a higher octane fuel, more power and better fuel efficiency will be achieved.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eOptimized Maximum Output\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eUnitronic’s ECU Calibrators deliver the maximum power output while staying within the operational limits of the factory engine and drivetrain components. Specifically, this results in the highest engine performance without sacrificing the reliability of the engine, turbocharger, or other engine and drivetrain components.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eFactory Safety Limiters Retained\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eOEM “fail safes” are retained within the ECU calibration. Close monitoring of all operation parameters ensures that engine operation stays within factory components limits, resulting in reliability.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003ePower Delivery Perfectly Optimized Throughout the Power Band\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eAligned with the OEM strategy, the calibration is designed to offer a large flat torque plateau to provide a smooth and linear power band. Maximum torque output is achieved sooner and maintained longer which creates a broader torque plateau and greater area under the curve. This results in an improved acceleration and optimal engine operation.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eSpeed Governor Removed\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eVehicle speed limiter within ECU is removed. (Subject to transmission rotational speed limit.)\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eImproved Fuel Efficiency\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eOptimized timing and injection in cruising condition allows for an improved fuel efficiency, under normalized driving conditions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eEngineered with Strict Industry Standards\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eWith over 10 years of experience with Bosch and Siemens engine management systems and calibrations, Unitronic is able to utilize its expertise, industry leading tools and equipment to ensure an optimal calibration; delivering maximum performance, while maintaining complete OEM-like reliability and drivability.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eExtensively Tested Under Various Driving Conditions\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eDevelopment begins using Unitronic’s in-house Maha Chassis dyno housed in an environmentally controlled cell; closely monitoring a plethora of operational data, utilizing industry leading calibration tools and resources. Beta calibrations are then tested in street and track scenarios, using multiple cars under various driving conditions. This engine calibration strategy ensures Unitronic Performance Software delivers maximum performance, OEM-like drivability and reliability anywhere in the world. Unitronic Performance Software is only released to its Clients once development is thoroughly completed in accordance to Unitronic’s strict standards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":51950601634094,"sku":"UNI-EVO4_2.0T","price":650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/Dynos-Mk8-GolfR-and-8Y-S3-Stage1-E85-web-1.jpg?v=1775850741"},{"product_id":"cts-downpipes-for-audi-c7-c7-5-s6-s7-rs7-4-0t","title":"CTS Downpipes w\/ High Flow Cats for Audi C7\/C7.5 S6\/S7\/RS7 4.0T","description":"\u003cp\u003eCTS Turbo has done it once again, we made the perfect cast stainless steel downpipes with high-flow cats for the C7 4.0T platform.\u003c\/p\u003e\n\u003cp\u003eThe CTS Turbo Cast Catted downpipe set for 4.0T Audi C7 (S6\/S7\/RS7) is a bolt on solution for increased performance. Our downpipe set eliminates the OEM cross over and includes the necessary harness extensions for the O2 sensors.\u003c\/p\u003e\n\u003cp\u003eCAD engineered cast stainless steel collector provides unrestricted flow and 3″ piping runs all the way back to the exhaust connection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCast stainless steel collectors\u003c\/li\u003e\n\u003cli\u003eHeat shielding to keep the temperatures down\u003c\/li\u003e\n\u003cli\u003e3″ Stainless pipes with sleeve clamps for easy install and maximum exhaust flow\u003c\/li\u003e\n\u003cli\u003eTaper to OE fitment for direct fitment to factory or aftermarket catback systems\u003c\/li\u003e\n\u003cli\u003eTIG welded\u003c\/li\u003e\n\u003cli\u003eHigh Flow 200 cell metallic catalytic converters to reduce exhaust flow restriction\u003c\/li\u003e\n\u003cli\u003eIncludes O2 Sensor Harness extensions\u003c\/li\u003e\n\u003cli\u003eIncludes installation hardware (downpipe gaskets not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe recommend purchasing new OEM gaskets for headache-free installation (part number\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"esnum\"\u003e4G0253115D, 2 required\u003c\/span\u003e)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStage 2 software tuning is required to remove the CEL, check with your software tuner.\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRace use only! Not legal for use on public roads.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2013 – 2018 C7\/C7.5 Audi S6 4.0T\u003c\/li\u003e\n\u003cli\u003e2013 – 2018 C7\/C7.5 Audi S7 4.0T\u003c\/li\u003e\n\u003cli\u003e2014 – 2018 C7\/C7.5 Audi RS7 4.0T\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":51960381833518,"sku":"EXH-DP-0026-CAT","price":1529.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/CTS-EXH-DP-0026-CAT_1.webp?v=1776138070"},{"product_id":"unitronic-ecu-performance-tune-software-for-audi-4m-q7-2-0t","title":"Unitronic ECU Performance Tune Software for Audi 4M Q7 2.0T","description":"\u003cdiv class=\"textTitle\"\u003e\n\u003ch2 class=\"textTitle\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003ePerformance Software Precisely Engineered for a completely stock car.\u003cbr\u003e\u003cb\u003ePerformance Software for your ECU Box Code is subject to availability.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003ch3 class=\"textTitle\"\u003eFeatures\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eOptimized Responsiveness, Smoothness, Drivability, and Comfort\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eUnitronic’s ECU calibrations are engineered to improve engine response and reduce low-end lag. Unitronic’s Performance Software has gained worldwide recognition and is well known for its broad powerband, with smooth power delivery, maximizing responsiveness and “area under the curve”, under normal and hard acceleration.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eIgnition Timing Precisely Calibrated for Higher Octane Fuel\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eEngine calibration optimized to take advantage of higher fuel quality to extract maximum energy from the combustion. Therefore, when using a higher octane fuel, more power and better fuel efficiency will be achieved.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eOptimized Maximum Output\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eUnitronic’s ECU Calibrators deliver the maximum power output while staying within the operational limits of the factory engine and drivetrain components. Specifically, this results in the highest engine performance without sacrificing the reliability of the engine, turbocharger, or other engine and drivetrain components.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eFactory Safety Limiters Retained\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eOEM “fail safes” are retained within the ECU calibration. Close monitoring of all operation parameters ensures that engine operation stays within factory components limits, resulting in reliability.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003ePower Delivery Perfectly Optimized Throughout the Power Band\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eAligned with the OEM strategy, the calibration is designed to offer a large flat torque plateau to provide a smooth and linear power band. Maximum torque output is achieved sooner and maintained longer which creates a broader torque plateau and greater area under the curve. This results in an improved acceleration and optimal engine operation.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eSpeed Governor Removed\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eVehicle speed limiter within ECU is removed. (Subject to transmission rotational speed limit.)\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eImproved Fuel Efficiency\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eOptimized timing and injection in cruising condition allows for an improved fuel efficiency, under normalized driving conditions.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eEngineered with Strict Industry Standards\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eWith over 10 years of experience with Bosch and Siemens engine management systems and calibrations, Unitronic is able to utilize its expertise, industry leading tools and equipment to ensure an optimal calibration; delivering maximum performance, while maintaining complete OEM-like reliability and drivability.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cu\u003eExtensively Tested Under Various Driving Conditions\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eDevelopment begins using Unitronic’s in-house Maha Chassis dyno housed in an environmentally controlled cell; closely monitoring a plethora of operational data, utilizing industry leading calibration tools and resources. Beta calibrations are then tested in street and track scenarios, using multiple cars under various driving conditions. This engine calibration strategy ensures Unitronic Performance Software delivers maximum performance, OEM-like drivability and reliability anywhere in the world. Unitronic Performance Software is only released to its Clients once development is thoroughly completed in accordance to Unitronic’s strict standards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Unitronic","offers":[{"title":"Add UNICONNECT+","offer_id":52136778826030,"sku":"UNITRONIC-Q7-4M-2.0-ECU-STG1","price":664.99,"currency_code":"USD","in_stock":true},{"title":"No UNICONNECT+","offer_id":52136778858798,"sku":"UNITRONIC-Q7-4M-2.0-ECU-STG2","price":500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/20-tsi-gen3-mlb-b9-stage1-unitronic-dyno-q7-1.jpg?v=1780282351"},{"product_id":"uniconnect-tuning-software-cable-flashing-kit","title":"UNICONNECT+ Tuning Software Cable Flashing Kit","description":"\u003ch3 class=\"textTitle\"\u003eDescription\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eUniCONNECT+ is a Programming and Diagnostic Interface which gives users the freedom to reflash their Engine Control Unit (ECU) or Transmission Control Unit (TCU) from the comfort of their own home or garage.\u003cbr\u003e\u003cbr\u003eWith the ability to upgrade Unitronic Performance Software, flash back to stock and also perform diagnostics, UniCONNECT+ is a complete end-user programming and diagnostic interface that provides control over your vehicle.\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003ch3 class=\"textTitle\"\u003eAvailability\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eUniCONNECT+ is available for purchase through our Authorized Dealer Network and from Unitronic directly. Compatible with most of 2006+ vehicles.*\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003ch3 class=\"textTitle\"\u003eSimple Installation\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eUniCONNECT+ gives you the freedom to effortlessly install your Unitronic Performance ECU and DSG Software from the comfort of your own home or garage.*\u003cbr\u003e\u003cbr\u003eUnitronic recommends the use of these battery chargers to ensure, uninterrupted, trouble-free, flashing at home!\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003ch3 class=\"textTitle\"\u003eChange Software Maps\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eQuickly and easily re-flash your ECU with Performance Software maps designed and specifically calibrated to suit vehicle hardware and fuel type used. (software sold separately)\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003ch3 class=\"textTitle\"\u003eData Logging\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eGathering high resolution data is made easy with Unitronic’s pre-configured channel loadouts for fast and effortless troubleshooting and data logging.**\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003ch3 class=\"textTitle\"\u003eSimple back to factory restoration\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eUniCONNECT+ makes it painless to revert your ECU back to the stock calibration within minutes.*\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003ch3 class=\"textTitle\"\u003eAdvanced Settings\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003eEnable optional advanced settings such as Launch Control or No Lift Shifting within minutes. Enable Gear display in MFG for DSG Software owners.*\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003ch3 class=\"textTitle\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cdiv class=\"subBlockTextDescription\"\u003e\n\u003cb\u003e\u003cu\u003eMinimum System Requirements:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eOperating System: Microsoft Windows 10 or 11\u003cbr\u003eInternet Explorer 11\u003cbr\u003eScreen Resolution: 1024x768\u003cbr\u003eProcessor: Intel\/AMD x86\/x64 Processor*** (1.5 GHz or higher)\u003cbr\u003eMemory (RAM): 4GB or more\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cu\u003eFor optimal application performance:\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003eOperating System: Microsoft Windows 11\u003cbr\u003eInternet Explorer 11 or newer\u003cbr\u003eScreen Resolution: 1024x768\u003cbr\u003eProcessor: Intel\/AMD x86\/x64 Processor*** (2.0 GHz or higher)\u003cbr\u003eMemory (RAM): 8GB or more\u003cbr\u003e\u003cbr\u003eInternet access is required.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Unitronic","offers":[{"title":"Default Title","offer_id":52136763097390,"sku":"UH008-TLA","price":164.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/files\/uniconnectplus3.jpg?v=1780283143"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/1719\/1726\/collections\/Unitronic_card.jpg?v=1751252373","url":"https:\/\/shopicwp.com\/collections\/unitronic.oembed","provider":"Inner Circle Wheels and Performance","version":"1.0","type":"link"}